Anyone got an MS362 nearby?

[Denji]

Hi lads and lasses,
I’m running an MS382 and fancy putting an obnoxiously loud exhaust on just for the sheer joy of it. WCS make a bark box for an MS362 that looks to have exactly the same fitments as my MS382.

Question is - does anyone have an MS362 to hand that they could quickly measure the bolts spacings on (or even better, has anyone fitted a 362 bark box to a 382?).

cheers!
Al

 

[Stihl99]

I have 362 bark box, here are your dimensions in mm
Height RS or exhaust side : 74.5mm
Height LS: 72mm
Width bottom: 77mm
Width top: 69mm
Diagonal corner to corner long side: 110mm
Diagonal corner to corner short side: 97mm

Edit to add: WCS claims that it improves the performance of the 362 is true and accurate.

 

[Jer75]

I just went out an measured center to center of the bolts. (Just used a piece of paper and made a dot at each center then measured with a tape, so probably not exactly exact )

Top bolts are 2 13/16" apart
Bottom bolts are 3 1/8" apart
Top to bottom LH side 2 15/16"
Top to bottom RH side 2 7/8"

 

[Denji]

Thanks guys! Much appreciated Have a brilliant day wherever in the world you are.
Al

 

[Denji]

I just went out an measured center to center of the bolts. (Just used a piece of paper and made a dot at each center then measured with a tape, so probably not exactly exact )

Top bolts are 2 13/16" apart
Bottom bolts are 3 1/8" apart
Top to bottom LH side 2 15/16"
Top to bottom RH side 2 7/8"

Turns out the 382 exhaust is a fair bit wider -

 

[Stihl99]

Yes that is a different cut muffler cover also