Explorerdan
ArboristSite Lurker
- Joined
- Nov 15, 2014
- Messages
- 14
- Reaction score
- 0
Any help would be greatly appreciated,
I have a Vermeer bc1000xl Chipper. The problem is the feeder drum only works in reverse. I have tested the safety switches all are good(checked with a meter closed and open positions). Also tested the directional switches on the top bar. Foreward/reverse/stop switches all work correctly.(checked with a meter closed and open positions).
The status lights are green for emergency stop. Meaning the circuit for the safety switches is operating correctly. When a safety is tripped the light goes out until safety is released.
The RPM status light is also lit green and there does seem to be the propper increase with voltage with engine RPM's
The foreward enable light is not lit??
The foreward on light is not lit??
When put into reverse the reverse light does come on.
I have checked the fuses both 10 amp fuses are good and have correct voltage..
I dont know what else to check???
It seems like the feeder drum should work because everything I know to check is working as it should..
I am out of Ideas..............
I have a Vermeer bc1000xl Chipper. The problem is the feeder drum only works in reverse. I have tested the safety switches all are good(checked with a meter closed and open positions). Also tested the directional switches on the top bar. Foreward/reverse/stop switches all work correctly.(checked with a meter closed and open positions).
The status lights are green for emergency stop. Meaning the circuit for the safety switches is operating correctly. When a safety is tripped the light goes out until safety is released.
The RPM status light is also lit green and there does seem to be the propper increase with voltage with engine RPM's
The foreward enable light is not lit??
The foreward on light is not lit??
When put into reverse the reverse light does come on.
I have checked the fuses both 10 amp fuses are good and have correct voltage..
I dont know what else to check???
It seems like the feeder drum should work because everything I know to check is working as it should..
I am out of Ideas..............