Bandit feedwheel lift install.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cutter1

ArboristSite Lurker
Joined
Aug 5, 2009
Messages
46
Reaction score
6
Location
Fl
Just made and purchased all parts needed to put lift on bandit 250.
Will work on bandit 150 200 250

Need
2x12 dual port cylinder 100
Energy 10228 control valve 100
Frame 1/2 plate 4inch wide upper
Base 3/8 plate
Lift block 3x5 x1 1 inch hole in center
Will need fitting
2 for cylinder oring style

2 for control valve in out main flow
3/4 male pipe x 1/2 female pipe swivel 90°

2 90° jic to pipe elbow 2501-08-08 work ports 1/2

Custom hoses by where and how you mount valve and main flow by year of machine

Will give measurements for frame made from template from machine I coppied from.Screenshot_2016-12-23-16-00-19.png Screenshot_2016-12-23-16-00-41.png
 

Latest posts

Back
Top