McC
ArboristSite Guru
This years dates are August 21, 22, 23 2015. Very much the same as in the past. The big "demonstration" will start at noon on Saturday the 22th. No charge to run your saws. We will be there all 3 days to cut wood and BS. Entrance into the grounds is free if you bring equipment to display. Use the exhibitor gate. Entry fee is $8 for spectators, children under 12 free with an adult. Here is a link to the show website for directions and other info.
http://www.badgersteamandgas.com/
The feature of this years show is Ferguson Enthusiast of North America, and National Graham Bradley and Sears Related Equipment.
Here are the chainsaw classes:
Antique 2-man, Antique geardrive 5cu and under, antique geardrive 5 cu and over, vintage direct 5cu and under, vintage direct 5cu and up, vintage 40cc and under "mini mac and others", vintage hotsaw. We use 1979 as the limit for vintage, so if the saw began production in 1979, but was actually produced in 1981, it still qualifies. The antiques are a little vague. The 2 man saws have been saws such as Mac 7-55, Mall 7, Disston. We don't want an 090 with a double ended bar competing in this class. There have been 090G's in the geardrive class. Vintage hotsaws have been Mac or West Bend kart powered. Modified vintage saws are also allowed in hotsaw class.We will have 10X10 cants for the direct drive saws. The geardrives will cut a round log about 15". The 2-man saws will be cutting something around 20"
Other rules: No alcohol/nitro fuel. Square filed chains allowed in hotsaw class only.
PM me with any saw related questions.
Scott
http://www.badgersteamandgas.com/
The feature of this years show is Ferguson Enthusiast of North America, and National Graham Bradley and Sears Related Equipment.
Here are the chainsaw classes:
Antique 2-man, Antique geardrive 5cu and under, antique geardrive 5 cu and over, vintage direct 5cu and under, vintage direct 5cu and up, vintage 40cc and under "mini mac and others", vintage hotsaw. We use 1979 as the limit for vintage, so if the saw began production in 1979, but was actually produced in 1981, it still qualifies. The antiques are a little vague. The 2 man saws have been saws such as Mac 7-55, Mall 7, Disston. We don't want an 090 with a double ended bar competing in this class. There have been 090G's in the geardrive class. Vintage hotsaws have been Mac or West Bend kart powered. Modified vintage saws are also allowed in hotsaw class.We will have 10X10 cants for the direct drive saws. The geardrives will cut a round log about 15". The 2-man saws will be cutting something around 20"
Other rules: No alcohol/nitro fuel. Square filed chains allowed in hotsaw class only.
PM me with any saw related questions.
Scott