Bent crank or worn race- Andy / Dennis ??

[chrispy6822]

Hoping to see my retiring friend today.In the meantime have been checking the BAY for dial indicators.Trying to get clarity from them as to how fine a measure they are.Heres a couple.

http://cgi.ebay.com.au/Eclipse-Dial...ryZ55825QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com.au/MAGNETIC-BAS...ryZ12581QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com.au/Dial-Test-In...ryZ12581QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

WOULD YOU THINK ANY OF THESE ok

Coming from the land of Starrett, plus the fact that I have a drawer full of just about every Starrett tool I could possibly ever use , I will let all in a little secret.

I have purchased Starrett tools for pennies on the dollar (even compared to ebay's prices) using the following search.

http://search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&dfsp=32&catref=C6&from=R40&satitle=starret&sacat=-1%26catref%3DC6&sargn=-1%26saslc%3D2&sadis=200&fpos=01452&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=32%26fsoo%3D2&fgtp=

If you take your time with it you will come up with some of the best buys on Ebay. One of my best was a brand new digital slide caliper which retails for $380 purchased for $28 with shipping.

 

[Lakeside53]

1 micron...pfft...thats nothing.

na.. that's roughly 40 microns:greenchainsaw:

 

[Dennis Cahoon]

No chainsaw crank!

This cranks runout is 0.0......and I only handle it with clean gloves on. Just getting finger prints on it will cause problems.

 

[Tzed250]

na.. that's roughly 40 microns:greenchainsaw:

.000001 meter= .001 millimeter= 1 micron

I promise

 

[Gumnuts]

This cranks runout is 0.0......and I only handle it with clean gloves on. Just getting finger prints on it will cause problems.

Dam serious stuff :jawdrop:
My wallet hurts just lookin at it -
Will NASA let you show the PC ?

 

[RDT]

:jawdrop:

 

[Gumnuts]

Coming from the land of Starrett, plus the fact that I have a drawer full of just about every Starrett tool I could possibly ever use , I will let all in a little secret.


Thanks for the tip - will add to list of must have items.

ME : ' but darlin i need it to ....an if i got it i can blah blah blah ...blah blah....blah'

DARLIN : OK, but don't forget to pay the blah blah......blah blah blah...


hehe

 

[Lakeside53]

na.. that's roughly 40 microns:greenchainsaw:

.000001 meter= .001 millimeter= 1 micron

I promise

ha! Got me. I misread the post!

 

[Tzed250]

ha! Got me. I misread the post!

Even a blind hog (me) finds an acorn every now and then

 

[2000ssm6]

Hey Dennis what does that crank go to? The pictures may be misleading but that looks like a dam long stroke......stroker motor for a saw?

Either way>>>>:jawdrop: :jawdrop: :jawdrop:

 

[Dennis Cahoon]

Hey Dennis what does that crank go to? The pictures may be misleading but that looks like a dam long stroke......stroker motor for a saw?

Either way>>>>:jawdrop: :jawdrop: :jawdrop:

It's for a 250 Honda non-stroker.

 

[2000ssm6]

It's for a 250 Honda non-stroker.

Ahhh a dirt bike motor. I was thinking to my self that is one big arse saw that crank is going in....LOL.



A saw as in a SP125 or 090..........