I never said that i cut a 10ft tree...WTF are you talkin about?????...get your facts straight :censored:....i said that a company nearby us did....it was the owner and 2 of his workers that told me...the cutter and the skidder operator....THEY said THEY cut one on a big tract...i think he said it was a state forest cut over 150 acres...he said it was waaayy up on a ridge...and he told me that the tree was dead and buckskin when they cut it....but he DID TELL ME that it was like 9ft dia on the stump...i didnt believe him either...but i've heard the same thing from a couple different people now...he said it was white oak...
Bore cut felling?
- Thread starter komatsuvarna
- Start date
Help Support Arborist Forum:
I never said that i cut a 10ft tree...WTF are you talkin about?????...get your facts straight :censored:....i said that a company nearby us did....it was the owner and 2 of his workers that told me...the cutter and the skidder operator....THEY said THEY cut one on a big tract...i think he said it was a state forest cut over 150 acres...he said it was waaayy up on a ridge...and he told me that the tree was dead and buckskin when they cut it....but he DID TELL ME that it was like 9ft dia on the stump...i didnt believe him either...but i've heard the same thing from a couple different people now...he said it was white oak...
I never said that anyone used springboards to cut 10ft trees.....man do you think a good story up...i bet you could sell that ocean front property in arizona that i have..sure you could...huh?? LMFAO wow
DangerTree
ArboristSite Operative
Many of the hard leaner's of the day's of old were conventional cut. The under cuts were not on the downhill side they were cut so the holding wood ran perpendicular to the lean and the strap was left thickest to the heavy side. The ground had to be prepared for the tree as it normally meant a side hill fall. Ropes and beasts of burden were were normally employed to ensure proper fell direction. Some of the bad leaners were blasted and then cut and split on the ground for transport.
RandyMac
Stiff Member
whip it, whip it good
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/PcEto_Q8MlY?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/PcEto_Q8MlY?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/PcEto_Q8MlY?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/PcEto_Q8MlY?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
hosses. . . . I would not want a fist coming from any of those dudes. Probably would feel like getting whacked by a pneumatic piston.
RandyMac
Stiff Member
A punch would be bad enough, but if one of them got ahold of you with their hands, they would pinch your head right off. Swinging an axe or hammer will give you a super grip, I learned this first hand (ha ha) when I worked in a Redwood splitting yard, we used 10 and 12 pounders, swung them like we were addressing a fastball.
haha, never even thought of that!
RandyMac
Stiff Member
My Dad was a sawfiler at PL's "B" Mill where the OG Redwood was sawn, he did that for 30 years, not fast on his feet, but his upper body strength was off scale and he was a giant like drilldaddy. I learned to be polite or be quick, if he got a piece of you, it was over.
DangerTree
ArboristSite Operative
Many of those guys had white finger disease and carpel tunnel syndrome. And to top it off, arthritis, mostly from squeezing and pounding. The cold weather would wreak havoc on them. Some guys get that today I have been very lucky so far just some minor back problems. I can be strong as an ox today and put my back out tying my shoes tomorrow!
Greystoke
Tarzan
Hemlock
Greystoke
Tarzan
coastalfaller
ArboristSite Operative
bitzer
******** Timber Expert
Great info on eastern old growth kid! I knew there was some big wood out there back in the day, but I had no idea how big.
I think I'm gunna go practice some bore cuts now to get ready for the real thing. Top of the tip right?
I think I'm gunna go practice some bore cuts now to get ready for the real thing. Top of the tip right?
hammerlogging
Addicted to ArboristSite
All the time. Just the way it is. depends on how you can get your saw into the tree based on where the face is and where the slope is behind you to manage to get your saw onto the tree.
Blah blah not recommended. Done all the time. I hate those trees you have to bore, need a low stump and don't have #### for space to work with to get your bore in.
bitzer
******** Timber Expert
Theres so many rules I break with a saw on any given day. I was doing that type of stuff before I knew it was something I wasn't supposed to do. I'm sure you could teach me a new one or two as well with the type of ground/trees you get to play with.
hammerlogging
Addicted to ArboristSite
Rain day.
BitzerBob, don't worry, they're not rules anyhow, just suggestions. Like the yellow line. And stop signs on private property.
BitzerBob, don't worry, they're not rules anyhow, just suggestions. Like the yellow line. And stop signs on private property.
That's good advice. There are some basics that are iron-clad rules but the rest of it is mostly common sense and paying attention to the tree. The tree is indifferent, it doesn't care if it kills you or not.
It's kind of like shooting pool or playing chess...you want to be thinking a couple of moves ahead all the time.
LOLOL...you can fall 100 trees that do exactly what you'd planned for them but that 101st might have you running for your life. Those are the ones that humble you and a little humility never hurt anyone.
Tzed250
Addicted to ArboristSite
GASoline71
Mr. Nice Guy
Yup... sometimes Humble Pie can taste pretty good actually... 
Gary
Gary
My great grandpa's first job was in a blacksmith shop in Arcata cold-riveting boilers by hand with 7 & 9 pound hammers. He was 13. Later he went to work for J.D. Turner in Eureka in their fabrication shop and eventually ended up building several of the big steam donkeys. He could "palm" a large watermelon and just about twist your arm off with his grip.
