Want to Buy Dogs

[Lightning Performance]

Need dogs that fit a 730xx-790xx Dolmar or Makita 64xx or 73xx.
Idk about others.... Johnsered maybe?

I have a nice large chromed matched three point set but don't want to grind them down for obvious reasons.
Looking for anything that bolts up to these cases as cheap as possible.
I'll pay shipping and possibly a bit more.
The condition doesn't really matter on these bucking spikes.

Broken, bent or egged out holes is fine.
They are getting altered.

 

[chipper1]

I have a nice large chromed matched three point set but don't want to grind them down for obvious reasons.

What's the obvious reasons .

 

[Lightning Performance]

What's the obvious reasons .

Chrome man, wth

Plus they're filled with too many holes.

 

[chipper1]

Grind them, weld the holes and grind the welds and all the chrome off, then paint them .

 

[Lightning Performance]

To

Grind them, weld the holes and grind the welds and all the chrome off, then paint them .

Too much work.
Get a thicker steel set and weld on to those.
These are thin.

 

[chipper1]

I see, so you probably wouldn't want another set of the same thing then.

 

[Captain Bruce]

Does anyone vend larger dawgs for Shindaiwa 488"s?

 

[chipper1]

Does anyone vend larger dawgs for Shindaiwa 488"s?

Maybe you should start a thread asking.
Personally I have no interest in helping someone who has acted as you do on here.

@Lightning Performance if you need a set like what you have I may have a spare set laying around.

 

[Lightning Performance]

Maybe you should start a thread asking.
Personally I have no interest in helping someone who has acted as you do on here.

@Lightning Performance if you need a set like what you have I may have a spare set laying around.

Whudinme ;-)

Thanks Boss!