dolmar 112 chainsaw bar problem

[jackie bennett]

i bought a 30" bar and chain combo off ebay here' the link
http://www.ebay.com/itm/171114883419?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT the mount studs on the saw is the original,but when i put the bar and chain on the chainsaw, the chain is real loose now the bar space where you mount the bar on the studs is a little to big,i guess thats why the chain is real loose,is there an chainsaw bar
Adapter that i can use to fix the problem thanks.

 

[Guido Salvage]

Are you really trying to hang a 30" bar on a 51 cc saw??? I think that may be the "problem"...

 

[pioneerguy600]

That bar is way overkill for a little 112, that bar is intended for a 123, 133 or bigger Sachs Dolmar. The 122 is at its maximum with a 20" bar on it.

 

[Warped5]

That bar is way overkill for a little 112, that bar is intended for a 123, 133 or bigger Sachs Dolmar. The 122 is at its maximum with a 20" bar on it.

^^ Agreed!! ^^

OP, what are you thinkin'?

Not only is the saw overmatched by the size of the bar, but that bar has what's known as the 'Large Husky' (Oregon D009) mount and your saw takes the 'Small Husky' (Oregon K095) mount.