• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Dolmar PS-5100S stuff (chains/bars 16"/60dl 3/8" .050")

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fsfcks

ArboristSite Operative
Joined
Feb 10, 2008
Messages
259
Reaction score
26
Location
Kansas
Clearing out garage, and getting rid of non-working Dolmar PS-5100S and related new/used accessories. Both my current saws are .063" Stihls so anything with .050" gauge is not any use to me. Dolmar last worked about 3 years ago, and was put aside in frustration when it stopped working.

Excluding non-working chainsaw, I estimate pro-rated value of everything else is about $170.Would prefer to sell/ship everything as one lot. Open to reasonable offers. Will work with local Kansas City area-ish buyer for direct handover in public area to avoid shipping, otherwise buyer pays actual shipping costs.

Full list and descriptions. Not done this before, so please ask questions if this does not make sense:
  • Chainsaw – NOT WORKING
    • Dolmar PS-5100S serial number 0712109xxx (made in 2007?)
      Worked ok until would not start, at minimum likely needs cylinder kit (fixed under warranty before)
      On SawLeft picture my initials are scribed in the two masked areas
    • Unfortunately appears I shelved this with some (most likely E0) 2-stroke gas and bar oil in tanks, so may need some other repairs/maintenance
  • Saw Chains – all 60 drive links (16”), 3/8” (0.375”) pitch, .050” gauge
    • Stihl 33RM-60 semi-chisel
      • 1 chain: appears new/unused
    • Woodsman Pro WPL 16 30RC60
      • 1 chain: appears new/unused
    • Oregon Super Guard 72LGX60
      • 3 chains: 1 appears new/unused, 1 ~50% used, 1 ~75% used (needs cleaned, link pivots sticky with bar oil)
    • Oregon Vanguard 72V060G, low kickback
      • 3 chains: 1 appears new/unused, 1 ~25% used, 1 ~50% used
  • Bars – all 60 drive links (16”), .050” gauge, for Dolmar PS-5100S
    • Husqvarna RSN A 16/40 050/1 3 - 3/8 60 dl 92530HR Made in Canada
      Appears new/unused (paint still on rail edges)
    • Oregon 160ZZZK095
      Well used, nose-sprocket currently seized (suspect resin/oil gunk after 3+ years non-use)
  • Miscellaneous
    • Oregon 68210 large 7 spline 3/8" 7 tooth rim sprocket – new/unused (plus one used/worn out?)
    • Dolmar air filters
      • Dolmar flocked air filter assembly 181 173 190 (white plastic) – new/unused (qty 1), used (qty 2)
      • Dolmar plastic air filter assembly (black plastic) – new/unused (qty 1)
    • Dolmar fuel filter (head + filter) p/n 963-601-120 – new/unused
    • Dolmar felt filter p/n 963-601-240 – new/unused (qty 2)
    • Dolmar 16” bar cover – used
ChainsBars.jpg
Parts.jpg

SawLeft.jpg
SawRight.jpg SawTop.jpg SawFront.jpg
 
Clearing out garage, and getting rid of non-working Dolmar PS-5100S and related new/used accessories. Both my current saws are .063" Stihls so anything with .050" gauge is not any use to me. Dolmar last worked about 3 years ago, and was put aside in frustration when it stopped working.

Excluding non-working chainsaw, I estimate pro-rated value of everything else is about $170.Would prefer to sell/ship everything as one lot. Open to reasonable offers. Will work with local Kansas City area-ish buyer for direct handover in public area to avoid shipping, otherwise buyer pays actual shipping costs.

Full list and descriptions. Not done this before, so please ask questions if this does not make sense:
  • Chainsaw – NOT WORKING
    • Dolmar PS-5100S serial number 0712109xxx (made in 2007?)
      Worked ok until would not start, at minimum likely needs cylinder kit (fixed under warranty before)
      On SawLeft picture my initials are scribed in the two masked areas
    • Unfortunately appears I shelved this with some (most likely E0) 2-stroke gas and bar oil in tanks, so may need some other repairs/maintenance
  • Saw Chains – all 60 drive links (16”), 3/8” (0.375”) pitch, .050” gauge
    • Stihl 33RM-60 semi-chisel
      • 1 chain: appears new/unused
    • Woodsman Pro WPL 16 30RC60
      • 1 chain: appears new/unused
    • Oregon Super Guard 72LGX60
      • 3 chains: 1 appears new/unused, 1 ~50% used, 1 ~75% used (needs cleaned, link pivots sticky with bar oil)
    • Oregon Vanguard 72V060G, low kickback
      • 3 chains: 1 appears new/unused, 1 ~25% used, 1 ~50% used
  • Bars – all 60 drive links (16”), .050” gauge, for Dolmar PS-5100S
    • Husqvarna RSN A 16/40 050/1 3 - 3/8 60 dl 92530HR Made in Canada
      Appears new/unused (paint still on rail edges)
    • Oregon 160ZZZK095
      Well used, nose-sprocket currently seized (suspect resin/oil gunk after 3+ years non-use)
  • Miscellaneous
    • Oregon 68210 large 7 spline 3/8" 7 tooth rim sprocket – new/unused (plus one used/worn out?)
    • Dolmar air filters
      • Dolmar flocked air filter assembly 181 173 190 (white plastic) – new/unused (qty 1), used (qty 2)
      • Dolmar plastic air filter assembly (black plastic) – new/unused (qty 1)
    • Dolmar fuel filter (head + filter) p/n 963-601-120 – new/unused
    • Dolmar felt filter p/n 963-601-240 – new/unused (qty 2)
    • Dolmar 16” bar cover – used
View attachment 357748
View attachment 357749

View attachment 357750
View attachment 357751 View attachment 357752 View attachment 357753
How much for the 16" husqvarna bar and stihl chain? Thanks
 
Guys, have been working today, and now need to have dinner and go shopping for 4th. Will reply to msgs later tonight. Apologies for the delay.
 
Messages sent, and I'm waiting for replies. I understand this is 4th of July weekend so responses may take a while.
 
Back
Top