Some of the decomp plugs, clamps, and bar nuts. I bought a box of FT parts for a 372 build once, and ended up not feeling comfortable using any of them because I knew I'd sell the saw eventually. The crank assembly was heavier than stock, the metal on the oiler was lighter. Felt like it wouldn't be durable. The air deflector that goes under the starter was so ridiculously horribly molded that I re-used the stocker that had a small groove worn through it but still functioned.
Basically I had an issue with more than half of the components I bought. The experience created my opinion on this manufacturer. It was emboldened reading the threads about kit saws. EVERY one focuses on the problem areas and part swaps to OEM, just to make them function. And this is when the components are new. One has to believe that wear would cause premature failure to others. And then there are the build offs at GTGs, which consistently end in consensus that they're not worth it. And these opinions are from folks who have far more experience than me.
I don't have a Holzafarmeteccahuztl saw, and I won't. I repair and build OEM saws with OEM and a proven AM part here and there. I have used one Huztl clutch cover. The Chinese are just too inconsistent at this point.
My opinion is always evolving though.
I never bought a husky kit. Your right in that to make a trustworthy saw you gotta replace some parts. It can be done i have a 660 that is good as the one they made. But it required work and attention to detail. I got 500-600 in a 1200 saw.
I walk up to a tree and going to cut it down I don't want the thing melting on me half way in. Things happen fast. The case and tank and things are OEM quailty but you do, you must, make changes and you only have half the cost in it. thats a prize.
I replace, decomp, circlip, piston bearing, rotor, elastostart, cylinder, piston, carb, fuel hose, throttle bar, trigger, rim kit. Improved on the foil with header tape. The kit gives you the framework.
Cutting firewood it would be safe, felling is another matter
http://thechainsawkitguy.com
https://www.youtube.com/the1chainsawguy