Fine dust getting past air filter

[doubletrouble]

That's what I mean by a pre-filter. May try to stretch a sock over it or I've also heard panty hose mentioned. Those are a really fine weave as well and should stop more dust. I did compare the OEM Redmax filter and the one from China and the Redmax does have a tighter pattern and would stop more if it would have fit.

 

[Ted Jenkins]

Dirt bike riders know that if you have dusty conditions that you use a oiled sock that goes over the filter. The sock catches more than 90% of all the dust and the filter catches the rest. MX supply places often sell them in a three pack and they work great. Thanks

 

[CR888]

And cr888, I know it may seem frivolous to some by putting this much effort into correcting a saw but, other than a couple issues I've had with it so far it seems to be a decent saw for my needs. Most people say they won't last long and it could be true but in this case I beleive it could last longer ifthen dust ingestion is cut to a minimum. Would I like to have a Stihl saw? Yes, but for my needs I can't justify the expense or afford it at this point. I'm of the mindset that I'll do the best I can with what I have to work with. I like the challenge anyway. Lol

These saws can be great value if there gone over and tweaked a little. They are often poorly assembled and need a little care to be made reliable worksaws. I don't fear a small amount of fine sawdust in intake but your saw is taking in too much and could be made a lot better with a little effort.

 

[Big_Wood]

 

[PhilMcWoody]

In the GMT thread Sawtroll said a little bit of fine sawdust should not be a big deal. Kinda agree with that.

And the photo above seems to indicate that indonesian loggers agree too, lol.

 

[doubletrouble]

In that photo he is definitely pulling fine dust, wood chips and maybe some small birds.

 

[Big_Wood]

In the GMT thread Sawtroll said a little bit of fine sawdust should not be a big deal. Kinda agree with that.

And the photo above seems to indicate that indonesian loggers agree

if it's not there it doesn't ever need to be cleaned!

 

[astnmacgto]

Fine saw dust will probably not hurt the saw, but if you can stop the saw dust, why wouldn't you?

 

[PhilMcWoody]

Fine saw dust will probably not hurt the saw, but if you can stop the saw dust, why wouldn't you?

Indeed. And I would agree. I think for us up here in the Northeast, it's the other crap -- dirt, grit, sand — we really worry about, cos that's what's on a lot of the scrounge wood, at least.

generous @stihlaficionado just sent me a new HD air filter he had lying around, so me and the saw are happy, covered and grateful for that.

I can't speak for standing live wood, cos all I ever cut is storm-damaged and fallen wood, and side of the road leftovers.

 

[PhilMcWoody]

In that photo he is definitely pulling fine dust, wood chips and maybe some small birds.

u forgot the Komodo Dragons.

 

[Johnnybar]

In that photo he is definitely pulling fine dust, wood chips and maybe some small birds.

LOL! Ya gotta start payin' attention....he's pullin' blue jeans too! ...and a little too close to the inseam for comfort!

 

[doubletrouble]

Apparently it sucked the shirt right off his back!

 

[Big_Wood]

he's using 10:1 bean oil for mix so it'll survive lol

 

[Old2stroke]

You guys that think a little dust being ingested by the engine won't hurt, are missing some of the picture. Regardless of what happens to this stuff in the combustion chamber, it has to go through the crankcase to get there. Do you really want dust of any kind to get into the connecting rod bearings and the crankshaft bearings? What about gunge building up on the petals of reed valve engines? Lightly oiled breathable foam is the best solution. If you really want to be anal about it, K&N high performance filters (like the one in my 'vette) sell a recharge kit with special oil that is meant for the job and makes cleaning the foam easy.

 

[Johnnybar]

he's using 10:1 bean oil for mix so it'll survive lol

Bean?...thought it was coconut oil cause the thing kinda smells like pina coladas.

 

[Tony Wheaton]

I used house hold silicone on my 361 when I had it
It seals but doesn't glue it on so it's easy to clean off and reapply


Sent from my iPhone using Tapatalk

Where did you put the silicone?

 

[bwalker]

After looking at the pictures, I would suggest replacing the filter. If be concerned about the quality of the mesh and it's ability to block fine dust. You might be able to pressure test (using low pressure) the entire engine along with the carburetor. You might have to devise some sealing mechanism such as a sealing cone to place into the filter mounting nipple. Hope that makes sense.

Why do you think today's saws run much tighter tolerances? Air cooled engines are all pretty loose.