Went out to cut down the top of my hedge with a poulan 2900 with 20" bar this afternoon and of course I touched one of the wires of the fence that lives in the hedge, so I was sitting in the door of my garage filing chain when a guy stops in the ally and gets out and tells me he sees me here occasionally working on saws.
It seems he has a stihl saw that does not run and he bought a new one and do I want the old one.
To make the story shorter I stepped out the back door a couple of hours later and there sat an MS360 in real good shape except the piston and cyl are scored at the exhaust port, I've never done a saw before but from all the pics I've seen on the forum this one should be easy, the cyl should clean up easy, a new piston and rings and then find out what toasted it.
John
It seems he has a stihl saw that does not run and he bought a new one and do I want the old one.
To make the story shorter I stepped out the back door a couple of hours later and there sat an MS360 in real good shape except the piston and cyl are scored at the exhaust port, I've never done a saw before but from all the pics I've seen on the forum this one should be easy, the cyl should clean up easy, a new piston and rings and then find out what toasted it.
John