having trouble identifying husky 181 crank case seal

[Brad2185]

Im replacing the bearings and seals in my 1983 husky 181se. Serial number 008367. Well I figured out that I have 2 different size crankshaft bearings...very weird! I ordered the flywheel side seal but it seemed to large for the hole. So I checked it to the clutch side seal thats located in the oil pump assembly. It was a direct fit so i replaced that one. Now I dont know what to do to find the seal I need for the flywheel side now.

The seal from the flywheel side has some letters and numbers on it. Maybe someone could help me figure this out....

CFW B3
B1BFSL 0/5
15-26-6

 

[nmurph]

26mm OD
15mm ID
6mm thick

503-26-0204

 

[Brad2185]

Great! Thank u

 

[Brad2185]

Nmurph can u tell me how to get a set of thin piston rings for the 181?

 

[Winn R]

set of thin piston rings for the 181?

Otto Engine works
410-398-7340

For custom rings, they're reasonable.

Thanks to Jacob J

 

[psuiewalsh]

Otto also happens to be 30minutes from Brad!

 

[Brad2185]

Oh really? Ok cool. If otto can help me out I can just pick up in person! Sssssswwwwwweeeeeetttttt!

 

[Brad2185]

Well, Thank you and Jacob J!! I will give him a call tomorrow

set of thin piston rings for the 181?

Otto Engine works
410-398-7340

For custom rings, they're reasonable.

Thanks to Jacob J

 

[psuiewalsh]

You have the rings made yet?

 

[Brad2185]

Yup. Dave hookd me up with a nice set! She fired up the other day...oil pump is not workn tho...

 

[psuiewalsh]

Nice. Better get moving. Awful nice weather.

 

[Brad2185]

I know! Im swamped at martys...everybody wants their mowers serviced and ready to be picked up asap! I havent had much time to work on the 181. I think marty has a parts saw in the stash that i can steal a good workn pump off of...