Help I.D. Oregon Bar

[briantutt]

I have a new (but old) Oregon bar. It has 160---H009 stamped on it and says power match. From what I can tell it is a 16", 3/8, .050 bar but I can't figure out what models it fits on. I am pretty sure the H009 contains that info but can't seem to locate a list. Can anyone help?

 

[AZLOGGER]

I have a new (but old) Oregon bar. It has 160---H009 stamped on it and says power match. From what I can tell it is a 16", 3/8, .050 bar but I can't figure out what models it fits on. I am pretty sure the H009 contains that info but can't seem to locate a list. Can anyone help?

briantutt;
It is a 16", 3/8, .050 for Husqvarna Lg. Mount.

 

[briantutt]

So the Jonsered 70 and 70E must be different. The 70 or 70E I just got from my dad had this new bar with it but it doesn't fit (bolts on the saw are bigger than the slot). There isn't a model number on the saw but he says its a 70. see pic attached.

 

[AZLOGGER]

So the Jonsered 70 and 70E must be different. The 70 or 70E I just got from my dad had this new bar with it but it doesn't fit (bolts on the saw are bigger than the slot). There isn't a model number on the saw but he says its a 70. see pic attached.

Brian:
You need the D196 mount (more commonly refered to as Homelite mount) for your saw.

 

[briantutt]

so the D096 on it right now (modified) is likely the same except the groove width for the bolts then? Oiler hole must match okay or dad would have seized it up I suspect.

 

[Modifiedmark]

Yes the Homelite bar and the Husky bars you speak of have the oiler holes in the same location.

Bar slot sizes are different though.

 

[treetrasher]

h009

Looks Like A Husqvarna Rancher 61-62-l-65 Ss77-160-s-162 Se Sg-181-185-260-266-se-sg 285cd-380-s 480.1100.2100cd Hope This Helps

 

[treetrasher]

Do96

The Do96 Is Fir The Alpina-echo-homelite-jonsereds-olympic Oleo-mac-pioneer-remington -saw Mounts

 

[Crazee Canuck]

http://www.oregonchain.com/index.htm