Help identifying stihl 460 or 440 ?

[thinktwicez71]

Do I need a bigger fixed jet if I cant seem to get the rpms down below 14,000 and I tried going to 2 turns out on high screw with no change ?

Sent from my SM-G950U using Tapatalk

 

[PA Dan]

Do I need a bigger fixed jet if I cant seem to get the rpms down below 14,000 and I tried going to 2 turns out on high screw with no change ?

Sent from my SM-G950U using Tapatalk

I cant remember was the carb cleaned and a new kit put in it?

 

[thinktwicez71]

I cleaned the carb and put a kit in it , I used the old diaphram tho because it was the wrong kit , all the other parts were the same and new but the diaphragm was the wrong one so I used the old one . I just got the carb back out gonna open it up and see what fixed jet is in it .

Sent from my SM-G950U using Tapatalk

 

[thinktwicez71]

Has a .68 in it right now just verified it

Sent from my SM-G950U using Tapatalk

 

[thinktwicez71]

I found my issue [emoji848]

My own damn fault , I accidentally swapped the high and low needles when I cleaned it and must not of noticed it , one is longer than the other and that goes in the low side , I had it in the high side . Woops , all good now .

Sent from my SM-G950U using Tapatalk