Junkwrencher
Junkwrencher AKA 2Bears AKA Missedshot
Its' a 24" hard nose with the numbers 97 on its side then 0391, then below that, 3003 000 5531 , it also has a picture of the bar rails with 1.3 beside it.My question is,,, is it a .50 or .63 gauge? I tried to install a .63 but it is too tight, a .50 fits but is a little sloppy, could be a little worn, I can fix it if it is but didn't want to close up the rails if it is supposed to be .63..