country boy
ArboristSite Operative
http://i220.photobucket.com/albums/dd71/timberguy/misc112.jpgHere is some closeups of mine nothing fancy but works great http://i220.photobucket.com/albums/dd71/timberguy/misc111.jpg
How to build a peavie, cant hook, or log jack
- Thread starter jmatuska
- Start date
Help Support Arborist Forum:
country boy
ArboristSite Operative
something else to add is to have something welded on so that the hook will not come all the way back to the handle prevents smashed fingers. I also beefed up the stand pretty good so when rolling logs you can use it for extra leverage i have stood on mine several times just keep your head off to one side in case it slips it may cause premature tooth loss.
Metals406
Granfodder Runningsaw
That sounds like 1" schedule 80?? Your wall is thicker than what I used... So it should be plenty strong. I bet the hook was hard to do... I cheated and used a bender.
Yes, I found without the dish, the tooth didn't want to bite as good... But I could have just made the tooth longer--I just chose the hard way.
Metals406
Granfodder Runningsaw
You must be referring to rednecks... You said 'tooth loss'... Not 'teeth loss'.
Like Billy-Bob's momma told him at night, "NOW BILLY-BOB, don't be fo-gettin' to brush yo tooth before bed!"
LOL
beerman6
Addicted to ArboristSite
+1 Great idea,my middle finger on the left hand is purple from that very thing happening...
country boy
ArboristSite Operative
I built this one last month...
I used remnant pieces I had laying around... It's pretty heavy duty.
I can scale it for you if you want measurements.
The jack is removable so you can use it as a cant hook.
What's up with the disappearing gas can?
WOW
Metals406
Granfodder Runningsaw
Just simple picture animation... The gas can was there for scale.
ShoerFast
Tree Freak
Wonderful Work! 
They were a standard item in my grandfathers blacksmith shop,,,, Making them, repairing and re-handling them.
My hat's off to any that try and make there own EQ , there it not a better feeling!
But it's been mentioned, $100 frog skins is not a bad deal, or that $50 dollar used one,,,,but look at the opportunity to invent and experiment!
Just a cutting tip for the 'have-nots' leaving a limb on every so far gives you a cheater (lever) if you plan your work well. Life is never perfect, but we can live it perfectly.
They were a standard item in my grandfathers blacksmith shop,,,, Making them, repairing and re-handling them.
My hat's off to any that try and make there own EQ , there it not a better feeling!
But it's been mentioned, $100 frog skins is not a bad deal, or that $50 dollar used one,,,,but look at the opportunity to invent and experiment!
Just a cutting tip for the 'have-nots' leaving a limb on every so far gives you a cheater (lever) if you plan your work well. Life is never perfect, but we can live it perfectly.
kd460
ArboristSite Operative
OK, on the home stretch. Got all my bits ready to weld (I think). Question: How much of an overlap do you guys have in regards to the pivoting hook and the fixed tooth on the bar. Right now, my pivoting hook tip meets eachother at the end of the bar (where the fixed tooth gets welded).
All I need to do is cut the pipe a little shorter for the overlap, but how much and why? Currently I have them set up to meet.
Won't get any welding done till this eve, but want to have it all ready to go. KD
All I need to do is cut the pipe a little shorter for the overlap, but how much and why? Currently I have them set up to meet.
Won't get any welding done till this eve, but want to have it all ready to go. KD
ShoerFast
Tree Freak
Just $0.02 cents worth, but tack it and span a few logs.
The more over-lap the better the ratio of leverage the bite will have.
Experiment!
how much is the upper arm supposed to move? i understand that they move wood but i still dont know how to use it lol. sorry its new to me i could make one also but i dont get how the top arm is supposed to move or how much.
woodbooga
cords of mystic memory
oldie but goodies
If the plans don't work out, try hitting antique and used shops. I see a few dozen a year at yard sales and junk shops. Probably run anywhere between $5-$50 depending on whose selling.
If the plans don't work out, try hitting antique and used shops. I see a few dozen a year at yard sales and junk shops. Probably run anywhere between $5-$50 depending on whose selling.
