mile9socounty
Two-Stroke Swope
Alright. You still fans out there will get a kick out of this. Our 359 E-Tech's at work, are having major carb problems. It first started off last winter. You would get the saw started, warmed up and all. It would run fine all day, WOT and at idle. Bout midday. It would start acting up. The saw would be idling, and you pull the throttle trigger. The saw bogs out. So the High jet is out of whack. Nope. Stock adjustments, and it continued to bog out when you pull the throttle. It got so bad that you could even run the saw. We've had the carbs readjusted. Then the bosses spend over 1K$ on just two saws on some kind of carb mod. Didn't work. They are still in manufacture specs. The tabs have not been clipped on the jets. What the hell is going on? We just got another 359 back from the saw shop. Fresh rebuild on the carb and it's still doing the same darn thing. Any of yall ever have this problem? Or are we just blessed up horribly built saws? Ideas? Anything? I personally own a 359, but its not an E-Tech. Aint ever had a problem with it in the years I've had it. Any ideas? :censored: