mikerudder
Chainsaw Enthusiast
Bought a lot of stuff of a guy and ended up with 4 OEM 394 Cylinders and 7 OEM 394 pistons. (56MM)
Cylinders are all Mahle 56ZN9
One of them has a small chip at the bottom of the intake and bottom of one of the transfers(will show in picture)
The second one has a small chip at the top of the exhaust port
I am not sure if either of these could be ported to eliminate the chance of snagging a ring
The other 2 look really good inside.
All of the 7 pistons look in good shape, one has some carbon buildup on the top which I am sure could be cleaned off.
There are some subtle difference on a couple of the pistons that can be seen in pictures.
Make an offer on all or:
$125 per good cylinder plus shipping
$50 for the cylinders that are chipped
$50 per piston
Open to trade offers as well. (Rebuilding an MS880 088)
![IMG_3552.JPG IMG_3552.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/283/283966-98c25b0a71194373d1e835bf4e93493c.jpg)
Cylinders are all Mahle 56ZN9
One of them has a small chip at the bottom of the intake and bottom of one of the transfers(will show in picture)
The second one has a small chip at the top of the exhaust port
I am not sure if either of these could be ported to eliminate the chance of snagging a ring
The other 2 look really good inside.
All of the 7 pistons look in good shape, one has some carbon buildup on the top which I am sure could be cleaned off.
There are some subtle difference on a couple of the pistons that can be seen in pictures.
Make an offer on all or:
$125 per good cylinder plus shipping
$50 for the cylinders that are chipped
$50 per piston
Open to trade offers as well. (Rebuilding an MS880 088)
![IMG_3543.JPG IMG_3543.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/283/283957-050e0d7db23c70c333059c7ccfbba897.jpg)
![IMG_3552.JPG IMG_3552.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/283/283966-98c25b0a71194373d1e835bf4e93493c.jpg)