impressed with MS361 in action

[serial killer]

Must be that muffler mod.

Actually, I've been meaning to put the muffler from my old 361 on this one. Same size outlet, but I used a 90 degree bend so it points straight forward. This one works a little too well as a hand warmer.

 

[777ER]

Here are my 361s, one has a 25", the other a 28". Note that the 28" has a tad of bar burn on it, and a 361 really needs a larger oiler for that long a bar. The 25" oils just fine. You can get more oil by swapping in a 460 oiler piston and bolt into the 361.

You need dawgs on those 361's

I run my 361 with a 25" bar and a STIHL RS non-safety chain :greenchainsaw:

 

[joatmon]

You need dawgs on those 361's

I run my 361 with a 25" bar and a STIHL RS non-safety chain :greenchainsaw:

777,

It looks like you have never run that 361.

Silly me,

Joat

 

[777ER]

777,

It looks like you have never run that 361.

Silly me,

Joat

It has ran 3 tanks of fuel already, cut down 1 tree before that pic and 3 after (this tuesday).

I clean it at the end of the day with simple green and blow off all the sawdust with the air compressor.

 

[joatmon]

It has ran 3 tanks of fuel already, cut down 1 tree before that pic and 3 after (this tuesday).

I clean it at the end of the day with simple green and blow off all the sawdust with the air compressor.

touché

 

[windthrown]

Nice setup with the roller and side cover. These are the size dogs I am talking about though (Jeff's 361 with a 3/4 wrap):

[/QUOTE]

 

[mile9socounty]

:agree2: Agreed. I bought a full set of dogs for my Uncle on his birthday from Bailey's. They sure do look nice along with this 28" bar.