Looking for
2 24 3/8 050 stihl mount 440
1 14in 3/8 050 for a 200t not sure if these are even made
Lightly used or new
2 24 3/8 050 stihl mount 440
1 14in 3/8 050 for a 200t not sure if these are even made
Lightly used or new
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy ISO lightweight bars TSUMURA
- Thread starter 661Joe
- Start date
Help Support Arborist Forum:
Getting old, need those 
.
.
I have 200T bars in 14" OE lp 3/8.
Pile of used ones here nothing new.
Na just worn the one I had down to nothinGetting old, need those
I don’t care for the lp chains unfortunately
What do you run then.
3/8 picco is stihl nomenclature for 3/8 lp or low profile.
Now you have me wondering lol one moment please I know I don’t run the tiny ****
3/8 p 050 14” non safety
Got pics of a few ? How much you want?
Lol.
Picco, lp, low pro, all the same.
I like the stihl myself, good stuff.
Just finished sharpening a couple of them.
Yeah i hate them stupid double raker chains
after chains as well if someone has a deal on some
thompsoncustom
ArboristSite Operative
Than buy a better chain. Stihl sells full chisel chain with a single raker setup. 63ps
Your going to save the most weight running a picco bar and it's gonna cut faster too.
O I do lol I don’t run the double raker chains.
thompsoncustom
ArboristSite Operative
ok I don't know the weight of the 14in inch but stihl light weight picco for that saw is under 1 lb.
Stihl 16" E Light 3/8 Picco .050 Stihl 192/200/201 mount 14.6 oz
Yeah I just have been running the standard stihl 14 in I wouldn’t maybe even mind jumping into a lightweight bar and going to a 16 even if it was the same weight but two inches longer.
thompsoncustom
ArboristSite Operative
From the Stihl Website:
To reduce weight, it is completely hollowed out after being welded and is filled with fiber-reinforced polymide, making this bar up to 38% lighter as compared to the STIHL ROLLOMATIC® E
To reduce weight, it is completely hollowed out after being welded and is filled with fiber-reinforced polymide, making this bar up to 38% lighter as compared to the STIHL ROLLOMATIC® E
Sloughfoot
ArboristSite Lurker
I have Husky semi chisel on a stock 200T for trimming and dirty cleanups from fallen ash.
PM sent
