Still cleaning out the garage; here's another saw that I bought out of rural northern Sweden when I was living in Italy. Jonsereds 601, 56cc, produced 1969-1972, serial number 209229. Has the cool looking clutch cover that looks like it was inspired by a C1 Corvette.
According to my notes, the saw is a runner, but I didn't do anything other than fuel it up and start it, so I would plan to at least rebuild the carb and replace the fuel lines. Comes with a period correct Sandvik bar and chain, but the chain is done for. Compression came in at 160 psi.
Also comes with a starter pulley and an NOS recoil spring and sprocket and drum. I believe all the spares are correct for the saw.
$250 + shipping from zip 78248
According to my notes, the saw is a runner, but I didn't do anything other than fuel it up and start it, so I would plan to at least rebuild the carb and replace the fuel lines. Comes with a period correct Sandvik bar and chain, but the chain is done for. Compression came in at 160 psi.
Also comes with a starter pulley and an NOS recoil spring and sprocket and drum. I believe all the spares are correct for the saw.
$250 + shipping from zip 78248
Attachments
-
IMG_0091.jpg1.1 MB · Views: 0
-
IMG_0092.jpg1.1 MB · Views: 0
-
IMG_0095.jpg1 MB · Views: 0
-
IMG_0096.jpg1 MB · Views: 0
-
IMG_0082.jpg1.1 MB · Views: 0
-
IMG_0090.jpg1 MB · Views: 0
-
IMG_0093.jpg984.3 KB · Views: 0
-
IMG_0097.jpg1.2 MB · Views: 0
-
IMG_0099.jpg1.2 MB · Views: 0
-
IMG_0103.jpg2.3 MB · Views: 0