Leaking crankseal ? 327 XP

[Jan-Sietze]

I have bought another 372 xp , a 2006 model.
Before I get to work with it, I check everything on the saw.

I saw a lot of greasy residue on the flywheelside, would this be a leaking gasket ?
Or is it just dirt.

And then the next question;
What are the order numbers of SKS seals ? (or maybe another brand)
Husqvarna will not make them, they do order them anyway elsewhere , isn't it ???



Thank you so far.

 

[Jacob J.]

That doesn't necessarily indicate a leaking seal, but it's worth replacing them if you suspect they're no longer functioning 100%.

 

[pantelis]

I have bought another 372 xp , a 2006 model.
Before I get to work with it, I check everything on the saw.

I saw a lot of greasy residue on the flywheelside, would this be a leaking gasket ?
Or is it just dirt.

And then the next question;
What are the order numbers of SKS seals ? (or maybe another brand)
Husqvarna will not make them, they do order them anyway elsewhere , isn't it ???



Thank you so far.

A simple pressure - vacuum test wil show you if is a dirt or a leak.
for the seals are the same with the models of a 2009 - 2013
the part numbers are 505 27 57 19 for the flywheel side and 503 26 03 01 for the clutch.
hope i help

 

[Big_Wood]

somebody probably just accidentally gave the starter a dose of bar oil by accident at one point.

 

[pantelis]

somebody probably just accidentally gave the starter a dose of bar oil by accident at one point.

looks like saw with double clutch side, i hope will be only dirt

 

[Jan-Sietze]

The saw reassembled, starts, but will not idle.
I still need to do some troubleshooting...

Looking for a pressure/vacuum tester, not too expensive .