Masterminded 362c 87 octane vs 94
- Thread starter KG441c
- Start date
Help Support Arborist Forum:
Mastermind
Work Saw Specialist
The saw sounds fast......
The wood is harder than woodpecker lips though.
The wood is harder than woodpecker lips though.
KG441c
Keith
Lmao!!!!! Randy that wood is very hard and dry. A can't from my local sawmill. That 362 is a keeper and getting stronger!!! Thanks for a screamer!!The saw sounds fast......
The wood is harder than woodpecker lips though.
Ron660
Addicted to ArboristSite
Good videos. I also counted the 94 slightly faster. That ported 362 looked fast! Add a couple more cants and I'll bring down my ported 660.
Ron660
Addicted to ArboristSite
I'd like to see a full comp chain in those cants to compare to that square chisel.
Mastermind
Work Saw Specialist
You really need fresh cut, knot free poplar or pine to get consistent cut times. That wood will likely be all over the place in timed cuts.
KG441c
Keith
The square chisel to me on the 16" 026 didn't cut well. I think full comp would be better but the square does good on the 362c . Extra bananas in the 362c
Mastermind
Work Saw Specialist
MS362XB.......
KG441c
Keith
Lmao!! There it is! Masterminded XB model!!MS362XB.......
Mastermind
Work Saw Specialist
MM362XB?
KG441c
Keith
Master minded 362 extra bananas model. Stihl should get onboard!!
bryanr2
Addicted to ArboristSite
I like it.....
This seems fitting to post in a "Mastermind" topic thread. If you can get past the first 15 seconds.... it's hilarious.
watsonr
Addicted to ArboristSite
Saw looks good and that bar tops it off!
Mr Rogers autotuned. Still sucks
Mastermind
Work Saw Specialist
Fred Rogers is a hero.........at least in my mind. Selfless service is the term that applies I feel. 
From Wikipedia.
Rogers received the Presidential Medal of Freedom, some forty honorary degrees,[4] and a Peabody Award. He was inducted into the Television Hall of Fame, was recognized by two Congressional resolutions, and was ranked No. 35 among TV Guide's Fifty Greatest TV Stars of All Time.[5] Several buildings and artworks in Pennsylvania are dedicated to his memory, and the Smithsonian Institution displays one of his trademark sweaters as a "Treasure of American History".
From Wikipedia.
Rogers received the Presidential Medal of Freedom, some forty honorary degrees,[4] and a Peabody Award. He was inducted into the Television Hall of Fame, was recognized by two Congressional resolutions, and was ranked No. 35 among TV Guide's Fifty Greatest TV Stars of All Time.[5] Several buildings and artworks in Pennsylvania are dedicated to his memory, and the Smithsonian Institution displays one of his trademark sweaters as a "Treasure of American History".
mt.stalker
ArboristSite Guru
Lol , did you ever see the blooper reel of Mr. Rogers Neighborhood ??? After filming one episode , Fred thought the camera was off , and he statedFred Rogers is a hero.........at least in my mind. Selfless service is the term that applies I feel.
From Wikipedia.
Rogers received the Presidential Medal of Freedom, some forty honorary degrees,[4] and a Peabody Award. He was inducted into the Television Hall of Fame, was recognized by two Congressional resolutions, and was ranked No. 35 among TV Guide's Fifty Greatest TV Stars of All Time.[5] Several buildings and artworks in Pennsylvania are dedicated to his memory, and the Smithsonian Institution displays one of his trademark sweaters as a "Treasure of American History".
" There , that ought to keep the little bastards happy ". I was pizzing myself when i saw that
KG441c
Keith
I wonder if he ran Husky or Stihl
Mastermind
Work Saw Specialist
I think he was a Dolly guy.
bryanr2
Addicted to ArboristSite
Wish I had a shady place to play with saws, but a side effect of CAD and Ported Saws is "lack of flora" where trees are senselessly harvested for their "heat making" properties. When i bought my 1 acre lot, it was the most shaded property in the neighborhood. 40 trees later.... it's hot all summer. Cant stand to run a saw until Oct. Ive got 25-30 good sized oak tree trunks to cut up this fall. Cant wait.
