Withdrawn McCulloch Titan 50 Project

[mitch95100]

Have a McCulloch Titan 50 Project up for dibs. This is what I know about it and I will post pics after I get back in from the shop tonight. Its runs but stumbles and needs help... The fuel line is cracked as well as the impulse lineis kindof dried out so it will need fuel lines and an impulse line at the least. I did notice that when I opened the saw up the fuel line was pinched a little so added to the crack in the line this may be your problem Im not guaranteeing that it is or isn't but that is where I would probably start.. It has 175psi compression and I will throw the tester on for you to see. Oils fine. Does not come with a bar or chain.
Shoot me an offer... a snickers, lollipop, a refrigerator magnet, a warm half drank beer, whatever you want... Shipping is on your dime and I will keep it as cheap as possible. I don't have enough time for this project and want to clean up my junk around the shop.
Thanks
Mitch95100-

 

[Jon1212]

Have a McCulloch Titan 50 Project up for dibs. This is what I know about it and I will post pics after I get back in from the shop tonight. Its runs but stumbles and needs help... The fuel line is cracked as well as the impulse lineis kindof dried out so it will need fuel lines and an impulse line at the least. I did notice that when I opened the saw up the fuel line was pinched a little so added to the crack in the line this may be your problem Im not guaranteeing that it is or isn't but that is where I would probably start.. It has 175psi compression and I will throw the tester on for you to see. Oils fine. Does not come with a bar or chain.
Shoot me an offer... a snickers, lollipop, a refrigerator magnet, a warm half drank beer, whatever you want... Shipping is on your dime and I will keep it as cheap as possible. I don't have enough time for this project and want to clean up my junk around the shop.
Thanks
Mitch95100-

Any interest in trading for guide bar(s)?

 

[mitch95100]

Here you go boys and girls pitters!!!

Sent from my iPhone using Tapatalk

 

[mitch95100]

Any interest in trading for guide bar(s)?

Ohhh possibly whatcha got Layin around there?


Sent from my iPhone using Tapatalk

 

[mitch95100]

Oh yeah by the way the handlebar in the pics is indeed ass backwards... Just noticed that
Isn't screwed on thankfully haha been a long week.


Sent from my iPhone using Tapatalk

 

[Jon1212]

Ohhh possibly whatcha got Layin around there?


Sent from my iPhone using Tapatalk

Whatchu lookin' for, or in need of?

 

[mitch95100]

Ohh I don't really know I guess I have a nice pile of bars laying around here and not enough saws to put them on :/ I need a 28" 3/8 .050 for my 044 but that's about it right now


Sent from my iPhone using Tapatalk

 

[mitch95100]

I also need a 044 piston, crank bearings, and seal kit for another saw if any of you have any of those... Otherwise that green colored paper works as well


Sent from my iPhone using Tapatalk

 

[mitch95100]

Someone wants this thing right?!


Sent from my iPhone using Tapatalk

 

[mitch95100]

Bump. I'd take $25 plus shipping if someone wants it.


Sent from my iPhone using Tapatalk

 

[Zxbiker11]

Bump. I'd take $25 plus shipping if someone wants it.


Sent from my iPhone using Tapatalk

I will take your titan 50 saw if you still have it.

 

[jonathan696]

Have a McCulloch Titan 50 Project up for dibs. This is what I know about it and I will post pics after I get back in from the shop tonight. Its runs but stumbles and needs help... The fuel line is cracked as well as the impulse lineis kindof dried out so it will need fuel lines and an impulse line at the least. I did notice that when I opened the saw up the fuel line was pinched a little so added to the crack in the line this may be your problem Im not guaranteeing that it is or isn't but that is where I would probably start.. It has 175psi compression and I will throw the tester on for you to see. Oils fine. Does not come with a bar or chain.
Shoot me an offer... a snickers, lollipop, a refrigerator magnet, a warm half drank beer, whatever you want... Shipping is on your dime and I will keep it as cheap as possible. I don't have enough time for this project and want to clean up my junk around the shop.
Thanks
Mitch95100-

Still happen to have this saw sir?

 

[jonathan696]

I have a pretty nice one I may part with....

Can email me at [email protected]

 

[W321shark]

Is the saw still available? Thanks

 

[jonathan696]

I have

Can email me at [email protected]

if you still have message my email sir.

 

[jonathan696]

Checking for it now. If our can resend that would be great checking my junk box in case it got sent there. The good email goes there and the real junk comes into regular inbox :/

 

[W321shark]

@jonathan696 same here with the junk email. It’s almost as if they want to torture people. Also if you get word it’s gone and or are no longer interested for some reason. let me know. Thanks.

 

[jonathan696]

PM sent

What is your name under? You put the underscore between the “e” and the 696? Sometimes that happens. Checked both Havnt seen yet.

 

[Lt1]

Hello, I'm looking for a Mcculloch Titan 50 carburetor? Anybody? Thank you.

 

[Lt1]

Still searching for a McCulloch Titan 50 carb. MODEL #HDA-77.