stihl023/5
Addicted to ArboristSite
I thought I would cut some smaller wood this morning and was going to use the MS 250 the wife gave me for Christmas. Wrong good thing I took the Echo CS400. Anyway I started cutting with the 250 and the chain tightened up, yep hot again. Checked for fling off on a stump and there was none. So I set the disappointment aside and used the 400. Yes the chain is sharp. The bar didn't have a chance to get plugged. I cleaned and checked everything and ran it with the bar off and the flow looked good. I had a 025 and still have a 023 both had 3/8 lp set ups. And that 023 makes this 250 look like a pos. Would these 250s work better with the 3/8 lp set up. Being it is or supposed to be under warranty I am tempted to take it in but the local dealers well I best not say. Any suggestions would be helpful thanks.