Ms310 cylinder (pics) is it still any good ?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

slowcar281

ArboristSite Operative
AS Supporting Member
Joined
Sep 19, 2013
Messages
223
Reaction score
158
Location
Manassas, VA
So I ended up with a free ms310 with a scored piston, and a crank bearing that came apart. I tried cleaning the cylinder.. didn’t have any acid but lots of sandpaper. Had to go down as far as 100 grit to remove the aluminum. It’s pretty clean now but I don’t know if it’s still useable. If it’s not, no big deal as I only have my time and a few beers into it. The first pic is what it looked like once I tore it down.
 

Attachments

  • E6DE533B-FBC1-409E-877F-590EADA0C663.jpeg
    E6DE533B-FBC1-409E-877F-590EADA0C663.jpeg
    1.1 MB · Views: 2
  • 7C62A591-E745-4A69-8364-DD473A14A42A.jpeg
    7C62A591-E745-4A69-8364-DD473A14A42A.jpeg
    1.1 MB · Views: 1
  • A738D1CB-1730-4678-B278-484CA56FDCE7.jpeg
    A738D1CB-1730-4678-B278-484CA56FDCE7.jpeg
    1.2 MB · Views: 1
  • B261E29C-7CAF-4916-9CBF-3A67A13A2B16.jpeg
    B261E29C-7CAF-4916-9CBF-3A67A13A2B16.jpeg
    1.1 MB · Views: 1
  • D88295B5-F5A1-4FEA-8D1F-C6E9563E1F89.jpeg
    D88295B5-F5A1-4FEA-8D1F-C6E9563E1F89.jpeg
    582 KB · Views: 2
Thanks for the input. I couldn’t feel anything so I had my wife run her nails across it and I believe it’s fine.

I’d like to throw a set of bearings, a piston, and new impulse/ fuel lines and see what happens. The saw is in pretty good shape otherwise
 
Back
Top