Neo Tec Vapor Locking

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Steve E.

New Member
Joined
Nov 24, 2023
Messages
3
Reaction score
0
Hello all!

New here. As the title suggests, my saw seems to vapor lock when filled full. At full throttle, it revs inconsistently. When I drain the tank to 2/3 or 1/2 full, it runs just fine. Has anyone run into this before and possibly have a fix for it?

Thanks!
 
The vent is on the chain brake side towards the back of the tank.
Thanks! Is it behind the chain tensioning shroud? I’ll see if I can find it and make sure it’s not plugged up with debris. On another note, do you know if there is another option for tank caps? My oil tank is leaking oil from the cap no matter how much I tighten it. Even switched both caps to see if that would help. No dice!
 

Latest posts

Back
Top