Morning Mike and Kenneth and everyone
It's definitely early for thumbs to be working
It's definitely early for thumbs to be working
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Voice to text Lewis!
Morning Dan, Lewis, Mike, and Kenneth. You all and the rest of the crew have a good day and be safe.
WKEND LUMBERJAK
Addicted to ArboristSite
Is it 5:00 yet
Morning midlanders!
I think I'll roll the vet out in the driveway to reconnect the fuel tank line. I hate it when gas runs on the floor and stinks up the house.
Echo engine together. Now needs new oil line. Off to Orschlens.
I think I'll roll the vet out in the driveway to reconnect the fuel tank line. I hate it when gas runs on the floor and stinks up the house.
Echo engine together. Now needs new oil line. Off to Orschlens.
Heh. Push comes to shove I can get about three saws in the folding top space in the vet. Bars removed, natch..
That way I can get to Iowa GTG without Blondie.
That way I can get to Iowa GTG without Blondie.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Sheesh Carl!
awol
ArboristSite Guru
And if Blondie ain't going, you can also use the passenger area. That gives you room for six saws!
Nope, pass seat will be piled with mix, bar oil and tools.
Yeah, Fat Alice can ride shotgun.
Yeah, Fat Alice can ride shotgun.
Got the CS341 mostly together only to discover I'm out of ignitions. Have to rob one off a 3000 if it is compatible.
These top handle Echos have two magnet and three magnet flywheels. And, the coils don't interchange. Lord knows what happens to the spark timing.
These top handle Echos have two magnet and three magnet flywheels. And, the coils don't interchange. Lord knows what happens to the spark timing.
workshop
Addicted to ArboristSite
Well, went to the cardiologist this morning. Now I've got to do a stress test Friday morning. I hate stress tests! And, I've got to be there at 7:15 AM! And no coffee! I told them my heart doesn't start without coffee. Didn't help. 
.
. 
SteveSS
Addicted to ArboristSite
cobey
Addicted to ArboristSite
i had one of them ..... i had to run on a treadmill ... for a long time... i was tired... it kinda sucked, i hope you are ok Steve, IWell, went to the cardiologist this morning. Now I've got to do a stress test Friday morning. I hate stress tests! And, I've got to be there at 7:15 AM! And no coffee! I told them my heart doesn't start without coffee. Didn't help.
want you healthy to hang out and saw and stuff, you are in my prayers my friend
cobey
Addicted to ArboristSite
i messed with my grinder tonight, had a semi chisel that wouldnt feed... it will now ... it will probably be a grabby turd.
i mainly wanted to see how much angle i could get on it, you know its too much when you knock part of the raker off
i mainly wanted to see how much angle i could get on it, you know its too much when you knock part of the raker off
cobey
Addicted to ArboristSite
I need to thin the stone some
Jeepsnchainsaws
ArboristSite Operative
Got it together! Have it pretty well dialed in for break in with this heavily modified muffler. It starts SO easy, half a pull.
There are LOTS of new parts in it.
Ran 12 ounces of fuel through it and took a couple cuts, I am very happy with it and really excited to put the pipe on it!
cobey
Addicted to ArboristSite
sweet!!
cobey
Addicted to ArboristSite
how does it run??
Jeepsnchainsaws
ArboristSite Operative
WAAAAAY better than it looks lol.
I didn't push it too hard tonight, with all the new bearings, piston, rings I just let it warm up a few times while easing through a couple White Oak cookies with my LAST NEW CHISEL CHAIN,"Cobey"
Tommorow I will make sure all is well, bump up the timing and test it.
