Mr. Woodcock
ArboristSite Member
Does anyone have the stroke specs on the current pro saws from both husky & stihl? 026/260, 036/360, 361, 044/440, 046/460, 064/066/660, 346,357,372,385,395 and the dolmar/makita stuff
Does anyone have the stroke specs on the current pro saws from both husky & stihl? 026/260, 036/360, 361, 044/440, 046/460, 064/066/660, 346,357,372,385,395 and the dolmar/makita stuff
or do they mount up different?
or do they mount up different?
Stihl 390 or Husky 390? If Stihl, then no.
Dolmar 6400, 7300, 7900 / Makita DCS6401, 7301, 7901 and Solo 681 all can use the same P/C.
http://www.baileysonline.com/itemdetail.asp?item=BBN 7900
Ill anything bolt onto a 357xp?
Don't forget the 2149 & 351. On a side note all will interchange with each other! The carbs are different between the new & old, the new ones have the purge bulbs, but thats easy enough figured out.
Husky 50/51/55 (some of the 50's that is).
346-1.28''
357-1.34''
372-1.42''
385-1.46''
395-1.50''
source-husqvarna website
Well, i can tell you that the 288, 660 swap dont work, even with the 460 pin. Dont know what info i got, but it dont work.
Les
do you have that in mm?
Enter your email address to join: