Partner p55 hard to tune

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joedangelo04

ArboristSite Lurker
Joined
May 27, 2022
Messages
40
Reaction score
27
Location
Central CT
Hi, I am working on said saw. I soaked and rebuilt carb and did all the usual things. I have it running ok but not great. Idle wanders then stalls out. It also has a big ole flat spot I can't get rid of. It is a Tilly hs nd the only thing I didn't do was set metering level height. I'm thinking seals. Any thoughts?
 
So I messed with the metering lever and now the saw won't even start. I really don't think it's the carb as I sprayed and soaked it in berrymans. I think I am going to pull it apart for seals and maybe rings. Anybody have part #'s and a source for this saw!
 
I don't have the tool but the IPL is pretty clear flush w the c body. Now won't start. Other partners I have worked on were easy runners.
 
Hi, so I got the part # 275715 from the diagram. I can't find these seals anywhere on the net. I doubt the local supply houses will have them either. Suggestions?
 

Latest posts

Back
Top