Feedback and comments welcome, Im still learning.
Lakeside53 said:Nice.... What wood it it? You going to put end sealer on (or even just latex paint.)?
I use simliar staps to keep my ceder from warping - need to adjust them as it drys though.
CaseyForrest said:The 2x material is White Ash. The wood on the right is White Oak with a 2x12 piece of White Ash on top.
I thought about sealing it, but they are all about 12" longer than I need them, so Im not sure.
BIG JAKE said:Nice stack. Wish we had wood like that to mill around here. Any conclusions on those different ripping chains your using? What's working the best for you so far? Thanks for the pics
CaseyForrest said:The 2x material is White Ash. The wood on the right is White Oak with a 2x12 piece of White Ash on top.
I thought about sealing it, but they are all about 12" longer than I need them, so Im not sure.
Bill G said:Do you have a kiln or will you be sending it off after it air dries ?
Bill
CaseyForrest said:Well, out of the box the Lazer chain is the best. But after sharpening and setting the rakers, the Lazer and the Woodsman Pro are about the same.
I would reccomend, as others have, to sharpen and check rakers before putting it into use. I found the rakers to be almost all a different height on all the chains Ive used so far.
I got my dealer down to $.30 a drive for the lazer, which is nice if I need some in a pinch. Ill order more from Baileys though if I need some.
Where in Albuquerque are you? My brother and his wife live in Rio Rancho.
Enter your email address to join: