As said earlier, the points and cond. are no longer needed, so no need to pull the flywheel.
You just cut the wire to the points/cond. and wire in the ignition/trigger
module, and that same wire splices onto the kill wire.
If your module has 2 wires, the other goes to ground.
I am not familiar with your module, so the polarity may need to be reversed,
and I have heard that different modules have differing timing, I do not know.
The Shindaiwa module I used had only 1 wire, and the other is just grounded
to the base, so no reversing that one, but the original Shindaiwa setup
worked great.