View attachment 683675 View attachment 683676 Late start to the season here as we’ve been terrible wet. Bought an old Dodge for my son to learn to drive last year, and it’s been handy for short quick trips to the timber. Pics are from last week. Only had a couple hours to spend, but dropped a 60’ dead standing oak and started on a blown out Black Cherry top. My son is 14 and very small for his age, but is doing a nice job in his first season running a saw under a watchful eye.
My 13 year old is 5'7" and wears size 11's. It is tough to know how much more he will grow as he has grandfathers and uncles from 5'5" to 6'4"Might be small for his age but looks like he wears size 15 boots! I was 4'9" when I started at the age of 14 and was 5'6" by the time I hit 15. Sure he'll hit his spurt. Nice photos and glad you got to share some time with your son.
I like the hole in the nose for the helper handle!Not much going on up here as I'm still just running junk loads when I can so it's a good time to post up our tools ...
So junk wood, junk saw ... 40cc Poulan Silver rockin' a McCulloch hard nose!! It was a dead hand me down saw that took some work, grabbed a hard nose outa the pile and got added to the herd after the 350 Ski incident ... RIP ... and it's still going !
View attachment 687562
Don't mind the bench, it was a busy fall. View attachment 687563
1970's bar, still has the hard chrome nose.
View attachment 687564
Just a all business 25deg tooth, rakers done on the hard side of a Husky guide, Oregon 72 3/8ths.
View attachment 687565
What are you running?
Keep on .... Runnin' Loads ....
I was runnin the Mighty Mouse Oh26 today
Nice cream-sickle there ... I have a tweaked 034 ... it'll show up later ...
I like the hole in the nose for the helper handle!
Hoola ... that a solid stack!!Some oak I scored today. Time to change oil in the ol tw5 and get some splitting done ! IF IT EVER STOPS FREAKIN RAINING IN MD !!!
Love the supervisor!! My current one only likes my wife ...Cutting wood last night and the supervisor keeping an eye out.
Kind of irritated, worked till midnight so I could get the wood out to a guy that's already rescheduled twice now. Just as I was heading to the shop to grab the truck, he cancelled again.
Ported 562 most of the time, still my favorite saw. Carlton and Oregon 3/8 square ground chain, prolly not the best grind for firewood but most of the stuff I cut is pretty clean and l just really like the way it cuts.View attachment 687902
So junk wood, junk saw ... 40cc Poulan Silver rockin' a McCulloch hard nose!! It was a dead hand me down saw that took some work, grabbed a hard nose outa the pile and got added to the herd after the 350 Ski incident ... RIP ... and it's still going !
View attachment 687562
Everybody runs a deckover around here, farm country, but there ain't much out there I'd take over a low profile gooseneck.
Enter your email address to join: