Saw Rpm

[dre100]

I have a 031 and a 056, The 056 turns alot of rpm with a sharp chain it will not bog down even if I push down on it just screams can I get a bigger sprocket for the clutch Drum so it will cut faster it has a twenty inch bar most of the stuff I cut is 18 inch and under firewood

 

[treeclimber165]

Take your rakers down a little, give it a bigger 'bite'. My 038Magnum was the same way. Even with a brand new chisel chain, I had to take down the rakers about 2 file swipes per tooth to get it to 'dig in' a little. And that was with a 27" bar! Gawd, I loved that saw!

 

[HUSKYMAN]

If you are running 3/8 chain now switch to .404