Zolo
ArboristSite Lurker
Hi guys, I am trying to open/remove the cylinder for my Stihl 041 AV and I am unable to find the right tool for it, as far as I believe it has 4 trox T25 screws on the cylinder but I am not sure which tool I need to use to remove those screws as screwdriver has to be more than 4 inch long, I have T27 screwdriver from Stihl, I also have Key wrench/Allan Keys T25 but either these are not more than 4 inch long or if I found a tool which is more than 4 inch in length It is not going through the cylinder holes as the tool is too thick. I am struggling on it now as I do not know which tool I need to buy that will do the job.
So far I have bought the below two tools
neilsen CT2899 250 mm X-Long T15/T20/T25/T30 Star Torx Screwdriver Set - Silver (4-Piece)
https://www.amazon.co.uk/d/Hand-Scr...coding=UTF8&psc=1&refRID=MATG17XJ2D3C06Q10S7S
LONG ARM HEX TORX KEY SET 9PCS
http://www.screwfix.com/p/long-arm-hex-torx-key-set-9pcs/49554
If i buy the below tool will it fix the problem? I mean will I be able to remove the cylinder screws.
Hakkin 8pcs S2 Steel 150mm T8-T40 Magnetic Extra Long Star Torx Security Screwdriver Bits Set
https://www.amazon.co.uk/gp/product/B01MXIGAT6/ref=ox_sc_act_image_1?smid=A14A87C88XI8FT&psc=1
any help will be much appreciated, let me know if you have any questions.
Regards
Zolo
So far I have bought the below two tools
neilsen CT2899 250 mm X-Long T15/T20/T25/T30 Star Torx Screwdriver Set - Silver (4-Piece)
https://www.amazon.co.uk/d/Hand-Scr...coding=UTF8&psc=1&refRID=MATG17XJ2D3C06Q10S7S
LONG ARM HEX TORX KEY SET 9PCS
http://www.screwfix.com/p/long-arm-hex-torx-key-set-9pcs/49554
If i buy the below tool will it fix the problem? I mean will I be able to remove the cylinder screws.
Hakkin 8pcs S2 Steel 150mm T8-T40 Magnetic Extra Long Star Torx Security Screwdriver Bits Set
https://www.amazon.co.uk/gp/product/B01MXIGAT6/ref=ox_sc_act_image_1?smid=A14A87C88XI8FT&psc=1
any help will be much appreciated, let me know if you have any questions.
Regards
Zolo