Stihl 041AV Spur drive drum PN

[AVB]

What is the PN for the 3/8 7 tooth spur drive clutch drum on the 041AV? When I lookup the number I have here in the IPL the cross that all for after SN 5664891 and the unit I am working on is SN 4148930.

Will the 1113 640 2000 work as my spur has the oil pump drive hole in one of tooths?

 

[Brushwacker]

1113 is an 031-032 P/N, but they take the same as the 041 for sprocket hubs, at least the several I have dealt with over the years. I have an 2010 stihl price parts book and the only 1110 (041 P/N) sprocket hub is actually listed as for an 040 ( same P/N prefix) 1110 640 2000 and is .404 pitch. Your # 1113 640 2000 is listed also as fitting, 031 ,032 and 041 and is 3/8 pitch. Good chance I have 1 if your looking or I am sure there is many new ones from dealers and suppliers. Rim is probably more popular I expect.

 

[AVB]

I my case I have two 041 is the shop and both Spur drive drums. One the serial is gone and the other is the one listed above. So will order the above PN and see what gives from there. THe one that purchase off Ebay actual was in better condition except for improperly install fuel lines and carburetor kit. Of course both has bad spur drives.

 

[L34]

Just installed a rim on dads 040.Oregon 18200x.
Cheers,Chris.

 

[L34]

Just reread your post.you are after a spur?
Cheers,Chris.

 

[AVB]

Yes that what's is on them currently. Not looking to change out the rim drive unless there is no choice.