A guy brought me two stihl chains and wanted them sharpened and wanted two new ones. It says Stihl on the chain, it says 3/8 also but only has a 3 on the drive link. I am assuming it it the stihl 33 chain meaning that it is .050. Am I correct/ According to my cross reference (I am using Carleton chain) it's supposed to give the full number and lettering on the cutter.
Stihl chain users
- Thread starter abohac
- Start date
Help Support Arborist Forum:
breymeyerfam
Addicted to ArboristSite
numbers on link =
1 = .043” = 1.1 mm
3 = .050” = 1.3 mm
5 = .058” = 1.5 mm
6 = .063” = 1.6 mm
1 = .043” = 1.1 mm
3 = .050” = 1.3 mm
5 = .058” = 1.5 mm
6 = .063” = 1.6 mm
Thanks. You are the only one who responded.
breymeyerfam
Addicted to ArboristSite
those numbers are directly out of the stihl bar and chain manual.
Erick
Addicted to ArboristSite
abohac, I read your post when you posted it originally but breymeyerfam had already given you the answer, didn't think it was necessary to add anything to it.
Print this --->page<--- out and hang it on your shop wall it tells you all you need to know about Stihls chin ID.
Hope this helps a little better, sorry I didn't offer it up before.... been kinda busy lately and haven't really had time to type just been skimming when I can.
Print this --->page<--- out and hang it on your shop wall it tells you all you need to know about Stihls chin ID.
Hope this helps a little better, sorry I didn't offer it up before.... been kinda busy lately and haven't really had time to type just been skimming when I can.
abohac, I read your post when you posted it originally but breymeyerfam had already given you the answer, didn't think it was necessary to add anything to it.
Print this --->page<--- out and hang it on your shop wall it tells you all you need to know about Stihls chin ID.
Hope this helps a little better, sorry I didn't offer it up before.... been kinda busy lately and haven't really had time to type just been skimming when I can.
I apprerciate that Erick. Was pretty sure I had the correct gauge for the guy but wasn't sure.
abohac, I read your post when you posted it originally but breymeyerfam had already given you the answer, didn't think it was necessary to add anything to it.
Print this --->page<--- out and hang it on your shop wall it tells you all you need to know about Stihls chin ID.
Hope this helps a little better, sorry I didn't offer it up before.... been kinda busy lately and haven't really had time to type just been skimming when I can.
Buy the way thanks for the ref page. My Carleton cross lead me to believe that it should have the whole Stihl number stamped on the DL.
