Stihl Psrt Numbers 660 441

[occ3377]

I have searched old posts and found what I think are correct part numbers but would like clarification.

660:
Dual Port Exhaust Cover- 1122 140 0800
Large felling Spike 1- 1122 664 0506 (0508?)
Large Felling Spike 2- 1122 664 0501 (0503?)
I will be picking up a new 660 that I bought power head only and the dealer didnt know if it would come with any felling spikes so a question I have, do I need 4 of the bolts and nuts or just the normal 2 of each
Bolt 9008 319 0960
Nuts 9214 320 0700
Ceramic chain catcher 1122 650 7700 (This works with above listed Spikes, Right?)

And finally are there any good upgrades for a stock 441? Is it right that the above listed spikes work with the 441? Is there any dual port cover or something?

Sorry for all the questions,
jake

 

[jeeptj19992001]

wouldn't the dealer have that information on his computer?

 

[DavesMower&Saw]

I have searched old posts and found what I think are correct part numbers but would like clarification.

660:
Dual Port Exhaust Cover- 1122 140 0800
Large felling Spike 1- 1122 664 0506 (0508?)
Large Felling Spike 2- 1122 664 0501 (0503?)
I will be picking up a new 660 that I bought power head only and the dealer didnt know if it would come with any felling spikes so a question I have, do I need 4 of the bolts and nuts or just the normal 2 of each
Bolt 9008 319 0960
Nuts 9214 320 0700
Ceramic chain catcher 1122 650 7700 (This works with above listed Spikes, Right?)

And finally are there any good upgrades for a stock 441? Is it right that the above listed spikes work with the 441? Is there any dual port cover or something?

Sorry for all the questions,
jake

All of your numbers are correct, and will work together. The parts will also work with your 441, the muffler on a 441 is one piece.

 

[Evan]

That would take a few minutes effort to look on the computer. And I'm not sure the salesman would be able to run the computer.

I font have part numbers but I know there's a set of dawhs that's fugly and way bigger than is needed

 

[RiverRat2]

All of your numbers are correct, and will work together. The parts will also work with your 441, the muffler on a 441 is one piece.

on the bumper spikes,,You will need 4 bolts with the locking nuts (two per side) and put it together with the blue grade loc-tite

and loc-tight the nut on the chain catcher,,, yes it wll work,,,

All the hardware will work on the spikes for the 441,,,

no factory DP for the 441 it is a crimped together muffler and it is full of Cr@p,,,,

 

[tlandrum]

bucking spikes should be included with a power head only purchase.

 

[Stihl-Pioneer]

The 0503 and 0508 are what come with the 660 and are a little bigger than the 0501 and 0506.

 

[occ3377]

wouldn't the dealer have that information on his computer?

Yea they probably do but I knew I could find the info on here easier and make sure I got all the little things like nuts and bolts. Also its a large rural shop where I don't think many people do anything to their saws after they are bought as far as modifying goes, so I decided to help them out.

Thanks for the reply's everyone, I'm going to get the ones meant for the 660 and see how they look on the 441. If I don't like it they will go right to the 660 and Ill get the others for the 441.

 

[DavesMower&Saw]

Here in the Northeast our 660's are shipped with a single small bar spike. Bar spikes and top handles are a regional option depending location on the location of the distributor.