Straps for EXL chain?

[edisto]

The GB bar I have for my Echo CS60S needs 69 DL, and I was hoping to shorten a 72 DL EXL chain.

Do the 3/8 Oregon pre-sets (P23910) and straps (P23837) work for EXL chain?

If not, does anyone have a source for the EXL 3/8 tie straps? I know that they come with the rolls, but I haven't found any sold separately.

 

[edisto]

If it helps, I found the following measurements online:

rivet diameter: .173

rivet to rivet distance (outside): .665

 

[HarleyT]

Same part numbers as the standard 91 straps.

 

[HarleyT]

Pic of catalog.

 

[HarleyT]

OOOOps.

Wrong chain...

 

[HarleyT]

Had to dig out the newer catalog....

 

[edisto]

OOOOps.

Wrong chain...

Yeah...that's low profile.

 

[edisto]

Had to dig out the newer catalog....

Awesome. Thanks Harley!

 

[HarleyT]

The whole page....

 

[dsell]

The 72LG or 72LGX straps will work. The first kit I got had the wrong straps. The strap and preset were for the same side but the straps had the same embossment as the rest of the chain. The last kit I got has flat gold straps but at least there is a left and right side. These chains are a ***** to break. I have 3 anvils and none of them fit the chain tight enough. I have to grind the heads off the rivets before I can punch them with the press. I have the adjustable anvil but it's a soft piece of junk. Never buy the Stens 700051 adjustable anvil. If someone knows of a good hard adjustable anvil let me know.