Stupidity = One nice Homelite 540 destroyed

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Guido Salvage

Guido Salvage

Supreme Saw Whoreder
Joined
Apr 27, 2010
Messages
11,513
Location
Farmville, VA
Some of you may have seen pictures of my Homelite 540 that I bought new almost 20 years ago. Believe it or not, I scored it at Northern Hydraulics (now known as Northern Tools). Never ran the 20" B&C that came on it but swapped on a 30" Total bar. I suspect that it has not had 3 tanks of fuel run through it in its lifetime. Here is a picture of it last spring.

PioneerP-20Poulan361001.jpg


I had also posted about the mobile saw storage unit I had bought at a salvage auction. You can see the 540 on the top shelf.

Edsalshelves005.jpg


I had to utilize my floor jack today in order to put new brake pads on my wife's car. Unfortunately, the jack was behind my storage cart. As I was moving the cart back into the garage the 540 fell off the top shelf. This is the result:

BrokenHomelite540007.jpg


BrokenHomelite540008.jpg


BrokenHomelite540012.jpg


As you can see, it landed handle first. In order to bring it back to its former self I will need a new case as well as an air filter cover. Makes me wish I had bought the Homie MP88 chop saw on e-Bay last month for the case. I doubt there are any out there as nice as mine was, can anyone help on the needed parts?
 
thomas72

thomas72

Addicted to ArboristSite
Joined
Nov 26, 2006
Messages
1,452
Location
Georgia
How did it damage the crank case? That is a shame, but it can be fixed. I bet that was the most expensive brake job you have done.
 
Guido Salvage

Guido Salvage

Supreme Saw Whoreder
Joined
Apr 27, 2010
Messages
11,513
Location
Farmville, VA
How did it damage the crank case? That is a shame, but it can be fixed. I bet that was the most expensive brake job you have done.

It landed on the handle as it fell and destroyed the case, the rest should be fine. I got no sympathy from my wife, her comment was that I wasn't using it so I wouldn't miss it. :mad:
 
tanker

tanker

ArboristSite Operative
Joined
Jun 3, 2007
Messages
463
Location
east central indiana
It landed on the handle as it fell and destroyed the case, the rest should be fine. I got no sympathy from my wife, her comment was that I wasn't using it so I wouldn't miss it. :mad:

Hell, my wife has something I don't get to use much,don't mean I still don't miss itl.LOL realy sorry about your saw,good looking old Homie. Scott
 
spacemule

spacemule

The Peanut Gallery
Joined
Apr 3, 2003
Messages
19,033
Location
the sideways 40
If it broke from that little fall, saw wasn't worth a damn anyway. :hmm3grin2orange:

I once lost a Sachs Dolmar 120 out of the back of a truck at 50 mph. It stabbed into the ground with the bar, and sat there quivering back and forth.

I pulled it out, tossed it back into the truck, and went on my way--no discernible damage.
 
oldiron

oldiron

ArboristSite Member
Joined
Dec 15, 2010
Messages
61
Location
Right here between Devil's Den and Hell's Hollar
It landed on the handle as it fell and destroyed the case, the rest should be fine. I got no sympathy from my wife, her comment was that I wasn't using it so I wouldn't miss it. :mad:

Should have just put one side of new brake pads on her car and explained she did not use them all of the time and she would'nt miss them....:hmm3grin2orange:

JK I feel your pain..

Kinda reminds me of the Christmas Story movie when the old mans leg lamp got broke....
 
Last edited:
chainsawwhisperer

chainsawwhisperer

Futuaris Nisi Irrisus Ridebis
. AS Supporting Member.
Joined
Mar 24, 2007
Messages
1,247
Location
Hopping down the bunny trail
First let me say how sorry I am for you.
Contact BillG, he has/had a NOS 540 tank.
Weimedog has some MP88 parts, including a handle, But on the MP88, the oil tank is cut through to the fuel tank to increase fuel capacity. It would need to come apart and have a plate welded into the oil tank.
Good luck
Jim
 
Top