Swap meet...

[Teddy.Scout]

Have a couple projects that need to get off the benchs.

I need of a newer-larger 066-660 crank.
Not much to offer but green backs, and a early model 066 crank.

Thanks guys.

 

[tlandrum]

are you working on the redlight or is that done already?

 

[Teddy.Scout]

are you working on the redlight or is that done already?

The bottom end is done.
And the top end is waiting for the carb kit installation.
Will be hunting for top plastics if my wrench hand is solid! LOL!

Trying to figure out if I can swap the redlight junk into a newer 066 late 660 that has the larger crank and toss in the redlight. I heard several talk about it, not sure if it is straight forward.

I seem to always get pulled when ever those older boat anchors make there way this way!!!!!!!!!

 

[glennschumann]

021 023 025 ms210 ms230 ms250 piston / cylinder or entire crank case for...

I've got an 025 in need of a new p/c, but not too much to trade... an 066 cylinder in need of some aluminum removal, a new 24" large mount Husky bar, and green backs. I can also slab large logs (Up to 54") if you are in the SE Wisconsin area.

PM if you have parts or a donor saw, I usually visit the Milling forum

 

[Teddy.Scout]

Any one know of a similar seal puller besides Stihls.
Want to get a nice one, just dreading the $200+ hit.
Ya, I looked into some threads and what others are using.
But again keep in mind, my wrench hand has only extended from little bit work I have done on saws.

 

[Teddy.Scout]

Go onto German eBay if you don't find what your looking for.
There is a guy selling pretty much every 80's and newer saws, blowers, weed whip parts (after market) but they are dirt cheap, and have held up well from the few I have gotten. Shipping is more then reasonable! Just a thought. Hunted 192 Pistons and cylinders most of summer and he came through, along with 2 BG85 top ends.

I've got an 025 in need of a new p/c, but not too much to trade... an 066 cylinder in need of some aluminum removal, a new 24" large mount Husky bar, and green backs. I can also slab large logs (Up to 54") if you are in the SE Wisconsin area.

PM if you have parts or a donor saw, I usually visit the Milling forum

 

[tlandrum]

im still in need of wrist pin bearing for a 394xp ,brake handle and coil

need ms440 tank

need 026/ms260 muffler cover

 

[Teddy.Scout]

I have clutch springs for old and newer 394's
muffler cover for 028
Brake handle for 028
And 2-3 air filter covers for a 028

im still in need of wrist pin bearing for a 394xp ,brake handle and coil

need ms440 tank

need 026/ms260 muffler cover

 

[stihl_collector]

I need a few bits for a husky 395xp im building

recoil assembly
tillotson hs300A carb
throttle lock, trigger and cable or a whole tank assembly.

 

[Eccentric]

Thinking this may go into the classifieds later. Cash only deal for this one...Daddy wants a new gun

Ah hell Rick. Why'd you have to go and do that???

Real quiet (so my wife don't hear).......tell me what you need to get out of that 1130G. Need details man.

Haven't checked the classifeds in a few days (and I'm not getting email notifications of replies in threads anymore)...........so sorry if you've posted the info already. opcorn:

 

[Saw Dr.]

Ah hell Rick. Why'd you have to go and do that???

Real quiet (so my wife don't hear).......tell me what you need to get out of that 1130G. Need details man.

Haven't checked the classifeds in a few days (and I'm not getting email notifications of replies in threads anymore)...........so sorry if you've posted the info already. opcorn:

Yeah, there may be more than one interested in knowing this.

 

[jgt]

John Deere 50v trade

Have John Deere 50v NOT RUNNING low comp. has spark turns over trade for ?

 

[jerrycmorrow]

Still looking for Olympic 481 parts. Not much to trade, but will pay and arm and a leg for what I'm looking for.

what you looking for

 

[MS460WOODCHUCK]

I am looking for a very nice not wore out 18'' .325 bar for a jonsered 2149. I have a almost new 16'' stihl bar to trade for one I also have other bars.

 

[Duke Thieroff]

I am looking for a very nice not wore out 18'' .325 bar for a jonsered 2149. I have a almost new 16'' stihl bar to trade for one I also have other bars.

What're you gonna do with that?


Cut wood or sumthin?


CT

 

[MS460WOODCHUCK]

What're you gonna do with that?


Cut wood or sumthin?


CT

One of these days hopefully.

So how do ya like the 480. Is it a ton more power than the 700?

 

[7hpjim]

bar

I am looking for a very nice not wore out 18'' .325 bar for a jonsered 2149. I have a almost new 16'' stihl bar to trade for one I also have other bars.

I have an 18" .325x.50 husqvarna small mount with about 4 cord on it that I could trade for a 20 or 24" 3/8x.58 large mount husky,contact me if interested.
7j

 

[7hpjim]

272 handle

Need clutch cover and top handle for Husky 61, 266, 268, 272 or Jonsered equivalent.

I have to trade:
a Jonsered 70e complete and a short block, combined they should make one running saw.

Husky 61, 268, 272 and 288 parts...

Shindaiwa parts...

chains and bars...

or money.

I've got a decent handle, need a piston and rings for a 268xp closed port husky
mahle cylinder, not the other one that starts with a g and sounds like one of the teflon dons soldiers. :hmm3grin2orange:

 

[Duke Thieroff]

One of these days hopefully.

So how do ya like the 480. Is it a ton more power than the 700?

That 480 runs and cuts good, haven't really taken it out and ran it hard yet though. Goes thru the wood with plenty of power to spare. Couldn't bog it in 18inch white oak rounds, buried the whole bar for noodles. It was throwing chips behind me 6 feet.

Just cut a few cookies and threw some noodles with it real fast. Next time I get to cutting they are both going out. I will be able to make a much better comparison then.


Plenty of saw there for firewood cutting.


So that J-red woke up pretty good after the mods, eh?

CT

 

[blsnelling]

I'm looking for parts for a couple different projects.

064

1. HD air filter cover
2. Muffler Cover
3. Starter spool, center bolt, dawgs, and retainer
4. Loop handle

MS260

1. Loop handle
2. Clutch drum, preferably for a rim sprocket
3. 16"-18" .325 .063 bar

PM me if you've got anything.