I need a 3-rivet Oregon .404 bar tip. Measures 2 13/16 tip-to-tip where it meets the bar. Anybody have one? Looks like this:
I think I have one of those. It will be a week or so before I can get home and check though.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I think I have one of those. It will be a week or so before I can get home and check though.
devonhubb
ArboristSite Operative
mdvalee, I've already got one sourced. Keep yours - I might need to buy it later. LOL Thanks!
kc4sfe
ArboristSite Operative
I have a used but good 20" Windsor sprocket tip b/c for Stihl that I need to swap for a 16" or 18" sprocket tip b/c to fit Stihl 026....anybody?
Sent from my intellectually challenged "smartphone".....
Sent from my intellectually challenged "smartphone".....
Steve NW WI
Unwanted Riff Raff.
Looking for rear av mounts for a 70E Jred - PN 504 12 50-04 and -05
Green or assorted old junk to trade
Green or assorted old junk to trade
jimbo1490
ArboristSite Guru
Is that the mount with the two jog metal pieces around it? If so I may have a NOS one.
Is the 20" b/c you have 3/8 or .325? What size are you looking for.... 3/8 or .325?
I run a 16" with .325 LP chain on my ported 026, it's fun.
kc4sfe
ArboristSite Operative
The 20" b/c is 3/8..... I can go 3/8 or .325 on the 16" as I need a sprocket also.
Sent from my intellectually challenged "smartphone".....
Sent from my intellectually challenged "smartphone".....
Steve NW WI
Unwanted Riff Raff.
I think so. I haven't laid hands on it yet, it's a friend's saw. You can see the mounts here: http://www.jonsered.ws/70e.pdf
Sorry I took a look this morning and the spare crank case didn't have a coil.
There is a coil for $21 free shipping on ebay...
http://www.ebay.com/itm/COIL-DOLMAR...336?pt=LH_DefaultDomain_0&hash=item43c44621c8
I might be your huckleberry... let me see what I can dig up.
Last edited:
Jimmy in NC
Addicted to ArboristSite
Looking for some Husqvarna 394 parts and have a few Stihl items to offer or some of those green things with funny pictures on them.
Looking for:
-recoil pulley
-Handle Bar full or half wrap.
-Muffler Heat Shield
-Clutch side case half?? Not 100% necessary but my bucking spike bolt holes are all messed up.
Anyone got something kicking around?
Looking for:
-recoil pulley
-Handle Bar full or half wrap.
-Muffler Heat Shield
-Clutch side case half?? Not 100% necessary but my bucking spike bolt holes are all messed up.
Anyone got something kicking around?
Mastermind
Work Saw Specialist
Speaking of 394XP parts......
I need a good OEM cylinder for one.
I'm also looking for 046/460, 660, and Blue 346XP coils.
I need a good OEM cylinder for one.
I'm also looking for 046/460, 660, and Blue 346XP coils.
husqvarnaguy
Addicted to ArboristSite
Any body got a good used 346 xp cylinder? PM me if you have something.
srcarr52
We can't stop here, this is bat country.
I can probably weld up those bolt holes and save that case half. PM me.
Big_Wood
westcoast dweller
All i am certain i have of this is the recoil pulley. Might have other stuff you need but would have to check when i get home.
Big_Wood
westcoast dweller
Delete double post
Last edited:
Big_Wood
westcoast dweller
Delete triple post
Last edited:
more wanted 394 parts... I'm needin clutch cover/brake, complete...
more wanted 394 parts... I'm needin clutch cover/brake, complete...
Jimmy in NC
Addicted to ArboristSite
No rush..its been two months to open the box!
Sent from my MiniMac running E-85!!
