Temperature of saw?

[wmswilson1]

I' considering different kinds of paint for a muffler and was curious about the temperature of the muffler/cylinder while the saw is running.

Thanks,
Matt

 

[smilin possum]

I' considering different kinds of paint for a muffler and was curious about the temperature of the muffler/cylinder while the saw is running.

Thanks,
Matt

Hey Matt we've had good luck with a automotive header paint. Couple light coats and then hijack the bosses oven and back it. Works pretty well.

 

[BobL]

I' considering different kinds of paint for a muffler and was curious about the temperature of the muffler/cylinder while the saw is running.

http://www.arboristsite.com/showthread.php?t=104379&highlight=temperature

 

[splitpost]

VHT engine enamel Gloss black,works good,just needs a few heat cycles before cutting wood or it gets all covered in sawdust and stuffs the appearance :bang:

 

[mountainlake]

Somewhere around 1300 degrees is where they melt down. Steve

 

[stihlboy]

Somewhere around 1300 degrees is where they melt down. Steve

Been there done that:chainsawguy: