The Beg for Manuals Thread

[tsm]

Can anyone help me locate a shop/service manual for a McCulloch MAC 120 I inherited from my Dad many years ago? Have the Owner's Manual, but it's not detailed enough. Thanks.

tsm

 

[MofoG23]

Hello Pittsburgh.....

Hello St Louis!

Could I also get the manuals for the 026 please.

Thanks again!!!:greenchainsaw:

 

[gmax]

Hello St Louis!

Could I also get the manuals for the 026 please.

Thanks again!!!:greenchainsaw:

 

[boda65]

Need IPL for McC 1-72

I am in need of an IPL for a McCulloch 1-72 saw. Any help would be appreciated.
Thanks, Jim

 

[constantine]

MS 441 Service Manual Needed

I need a service manual for the Stihl MS 441. Can anyone help me out?
Thanks in advance.

 

[mheim1]

I need a service manual for the Stihl MS 441. Can anyone help me out?
Thanks in advance.

Hello Delaware.

 

[Sager]

Service manual MS361

My Stihl 361 is stopping after 10 sec., so I am looking for a service manual and IPL. Have cleaned the carb. but it is still stopping.

Thanks in advance.
Sager

 

[mheim1]

My Stihl 361 is stopping after 10 sec., so I am looking for a service manual and IPL. Have cleaned the carb. but it is still stopping.

Thanks in advance.
Sager

Hello to Norway.

 

[lilbuj]

038 Magnum

Looking for the Service Manual and IPL.

Thanks in advance.

Johsua

 

[Sager]

Thank you and hello to mheim1, that was fast.

Sager
Norway

 

[foxbuilder]

Manual needed

I'm rebuilding my Stihl MS250c and I could sure use a service manual. If anyone can help on this, my e-mail is [email protected]
Any drawings would be appreciated.

Thank you so much,
Rocky W.

 

[TRI955]

I'm rebuilding my Stihl MS250c and I could sure use a service manual. If anyone can help on this, my e-mail is [email protected]
Any drawings would be appreciated.

Thank you so much,
Rocky W.

Hello Texas....

 

[karsc5]

Looking for a shop/service manual and IPL for Olympic 251 Automatic.

Thanks in advance:greenchainsaw:

 

[7hpjim]

181 se

Hello, I need the service manual for the Husqvarna 181.
thanks Jim

 

[cjcocn]

Hello, I need the service manual for the Husqvarna 181.
thanks Jim

Hello Ohio.

 

[TxAggie]

Looking for IPL and Repair Manuals for:

Stihl 028

Stihl 036

Thanks.

 

[Jethroww]

266

Thank you mheim1.
Jehtroww

 

[low2earth]

Begging for a 288xp service manual. Thanks for the help! my saw is 89-90 model I believe.

 

[Steve K]

026 ipl

026 IPL please..

 

[cjcocn]

026 IPL please..

Hello Oregon.