The made in north america Old Magnesium Swap Meet.
- Thread starter 67L36Driver
- Start date
Help Support Arborist Forum:
I have the starter covers, but I don't think any have the goose...I know I have plain ones and the cMC logo ones but I don't think there are any goose logo ones in the attic.
PM if you are interested.
Mark
PM if you are interested.
Mark
Air filter element for Homelite XL-101 type. My VI-123 and XL-123 have had to share one and that's like sharing underwear................................
Stuff or USD to trade.
Stuff or USD to trade.
Sharing underwear with whom?
I havn't had to, but, there is always a posibility.
Heh, went without drawers for a year in 'Nam. Too hot and sticky to confine the boys. I can understand why the Scots just wore skirts/kilts.
Made squatting and dumping easier while holding the 1911A1.
Looking for a muffler for a ProMac 10-10, although one from any 10-10 sewries may work.
Many thank,
Lee
Many thank,
Lee
As noted in the McCulloch thread, I have both the screens and the louvered baffles. Looks like yours just had the screen.
Mark
Mark
UnforsakenGhost
ArboristSite Operative
I'm looking for either a replacement electronic coil or a used points style to fit a sears roper 917.352133, its a g44 or any info on where to obtain more parts for this saw, its a cool old saw, I remember my dad running it, and I'd like to get it going again
look on ebait, there's a couple of parted out roper's on there.
http://www.ebay.com/itm/Sears-Craft...501?pt=LH_DefaultDomain_0&hash=item35dd1f8a85
http://www.ebay.com/itm/Sears-Craft...501?pt=LH_DefaultDomain_0&hash=item35dd1f8a85
UnforsakenGhost
ArboristSite Operative
Thanks, I searched there and cl, its a different looking coil than any on fleabay, the closest looking one is one off a 028 av here's a pic
UnforsakenGhost
ArboristSite Operative
Can I pm you tmr with measurements? the coil looks to be really close, almost a match except for the mount, although it looks as if one could be drilled to accept a bolt
What you need to do is find a points coil that fits the iron pole piece.
Wicko and Phelon made magneto ignitions for everybody. So, measure the center hole and watch the wire pigtails.
Wicko and Phelon made magneto ignitions for everybody. So, measure the center hole and watch the wire pigtails.
UnforsakenGhost
ArboristSite Operative
Yea but the coil is toast, the whole reason the saw quit and my dad set it in a corner, then eventually ended up in a scrap pile, I'd love to find a coil points or not prefer electronic, surely sombody has designed an electronic coil with the same measurements
UnforsakenGhost
ArboristSite Operative
Wicko and phelon is more info than I've found on the entire coil, no numbers of any sort
Look on the flywheel. It is part of the magneto. LOL
Looking for a serviceable piston for a PL/SL-55 Remington. 2.060" bore.
We have 'stuff' to trade or USD.
Longshot: A Homie XL-925 type piston may interchange.
We have 'stuff' to trade or USD.
Longshot: A Homie XL-925 type piston may interchange.
what carl is talking about is:
the coil is comprised of two main parts: the windings and the core. I've never heard of a core going bad (but its possible). generally an open or short develops in the windings.
carl's talkin bout finding a coil winding part and placing it on the original core.
I've done it as have several others. carl turned me on to a "winding" from a totally different saw that fits perfectly on the xl-102 core; voila!
Anyone happen to have a clean and tight 045AV case and crank -- early version? Lots to trade or caish/PP.
Possibly- I've got lots of 045/056 stuff.
