Trx250r180
Saw polisher
Thanks for posting pics of inside ,kind of a big surprise in there,are standard port timing numbers going to work on this model ?
The MS461.........A Peek Inside
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
dingeryote
Blueberry Baron
Nah!! You're all barking up the wrong tree.
That there widget is the antitheft/Lojak and EPA transceiver. I'ts gotta get switched on when a customer buys the saw or it wont run, and the NSA monitoring stations can locate the saw if it detects any tampering with settings that would alter emissions.
Quick wrap that thing in Tinfoil and send it to me, so I can properly dispose of it, before the black suburbans full of dudes in cheap black suits find you!!
Stay safe!
Dingeryote
That there widget is the antitheft/Lojak and EPA transceiver. I'ts gotta get switched on when a customer buys the saw or it wont run, and the NSA monitoring stations can locate the saw if it detects any tampering with settings that would alter emissions.
Quick wrap that thing in Tinfoil and send it to me, so I can properly dispose of it, before the black suburbans full of dudes in cheap black suits find you!!
Stay safe!
Dingeryote
wigglesworth
Booned
Ahhh... Come on now dinger, u know that ain't no husky...
But in all seriousness.... What in the H-E-Double Hockey Sticks is goin on in that saw???
komatsuvarna
Arboristsite MVP
I think it's more than likely a stuffer too....probably needed it due to the loooooong and narrooooow transfer ports 
. Stihl missed a good chance for some removable transfers covers here IMO.
Hard to tell exactly from the pictures, but it looks like the base of the cylinder would cover the ''flange'' bolts allowing them not to back out if they were ever to work loose.....which they probably wouldn't anyways. Them babys usually hold compared to Husky bolts!
. Stihl missed a good chance for some removable transfers covers here IMO.Hard to tell exactly from the pictures, but it looks like the base of the cylinder would cover the ''flange'' bolts allowing them not to back out if they were ever to work loose.....which they probably wouldn't anyways. Them babys usually hold compared to Husky bolts!
chadihman
Addicted to ArboristSite
I'm sure glad thats not my 461:msp_scared: I'm hearing a lot of hmmmm whats that and is that what that's supposed to look like from some of the best builders ever:msp_biggrin: With brains like you guys you can probably make it run awsome the first try
SawTroll
Information Collector
I was thinking of the inconsistent shape between the left and right side, not that they are up front.....
Last edited:
Mastermind
Work Saw Specialist
Pass the pie....
350jeepcj5
ArboristSite Operative
logging22
Cuttin to live, livin to cut
Skip the pie and and put some carbide in that saw already! We are watching you Randy.:msp_biggrin:
parrisw
Tree Freak
I've got two MS441CRMs up next then a Solo 681 before I will be doing this saw. I just wanted to see what was inside myself.
My first thought about that big hulk of metal inside the saw was that, some engineer had and "Afterthought".
Mastermind
Work Saw Specialist
Well Wiggs has convinced me to try it with and without. I think torque will suffer without it though....
komatsuvarna
Arboristsite MVP
I agree Randy. I'd think it would make it peaky,,,,,,,but ya wont know for sure until ya try!:msp_thumbup:
wigglesworth
Booned
It may very well drop off in torque, but u never know till u try...
Officer's Match
Addicted to ArboristSite
Packaging material I tell ya'... mmm, pie.
Mastermind
Work Saw Specialist
Pecan pie for me right now. Mmmmmmmmmm :msp_thumbup:
Officer's Match
Addicted to ArboristSite
Pizza pie for me.
KenJax Tree
Terraphobic
I think the extra little doohicky serves as a foil hat to keep the left wing nut jobs away.
I'm guessing that you'll lose RPMs too, as there'll be a drop in crankcase pressure, and therefore, velocity through the transfers. That's a mighty long transfer duct. Admittedly, I have no idea why they would do it that way.
