schmauster
Secret ArboristSite Operative
I've had some stalling issues with my 310. I went to retune the low screw and was unable to. It says 1/4 turn on the filter cover. I warmed it up and set the low screw to 1/4 and it wouldn't restart. Could it be carb issues or a case leak?
How I Tune low end.. correct me if I'm wrong.. warm it up, set the screws to the factory recommended on the air filter cover... Turn the idle speed screw till the chain starts turning then richen the low screw till it comes down to the correct idle speed.. sound correct?
How I Tune low end.. correct me if I'm wrong.. warm it up, set the screws to the factory recommended on the air filter cover... Turn the idle speed screw till the chain starts turning then richen the low screw till it comes down to the correct idle speed.. sound correct?