Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
my wife's grandfather owned this saw and I recently inherited it. I cleaned it up a bit and cranked it. The thing runs great, no smoke. After running it I got to looking for a spark plug and never found it. Anyone familiar with this saw and where the plug is?
1b53926b2485996042651235bb50bffe.jpg
237cf15aaab50ef2e191ba33c9b6ec89.jpg
c0d3fdae87d04b9777c105b9212537ce.jpg
79a27ba572d7b1023285fd4bf9ea2c9f.jpg
7ce8a88f6c46036fa9b498eba4f799b7.jpg


Sent from my SM-G935V using Tapatalk
 
my wife's grandfather owned this saw and I recently inherited it. I cleaned it up a bit and cranked it. The thing runs great, no smoke. After running it I got to looking for a spark plug and never found it. Anyone familiar with this saw and where the plug is?
1b53926b2485996042651235bb50bffe.jpg
237cf15aaab50ef2e191ba33c9b6ec89.jpg
c0d3fdae87d04b9777c105b9212537ce.jpg
79a27ba572d7b1023285fd4bf9ea2c9f.jpg
7ce8a88f6c46036fa9b498eba4f799b7.jpg


Sent from my SM-G935V using Tapatalk
C-9’s are awesome saws! Your going to love running it!
 
C-9’s are awesome saws! Your going to love running it!
are parts still available for these saws? I'd like to run a little longer bar if I can get one. Also, anyone know what gauge chain it is?

Sent from my SM-G935V using Tapatalk
 
are parts still available for these saws? I'd like to run a little longer bar if I can get one. Also, anyone know what gauge chain it is?

Sent from my SM-G935V using Tapatalk
Yes you can find parts, yes you can find larger bars and I’m pretty sure that’s a .063 gauge Chain. :)
 
Next one I have apart is my recent 2171 75cc. I cleaned up all the port work and will be ready to go soon, then my 2165 methanol pipe saw project.... that one will take a while to get finished. Gotta go to work tonight so instead of working today I'm taking my gma on a much needed lunch date. We used to go all the time before I started my new job, we hadn't been since. If I get time I'll take some pics of my John Deere B while I'm down there for you guys.
 
My recent project is this sucker here.

Came out super well, it was a full rebuild and port. I do need to do some adjusting on the jug then I'm going to get a bigger carb and boot for it but I really like the pipe muffler mod I did.View attachment 603634 View attachment 603635 View attachment 603636 View attachment 603637
Nice job! I've been working on a Poulan Pro 395 and my double barrel style muffler mod hasn't gone the best, blew through the paper thin sheet metal. Twice. Grrrr
 
Ya but if it makes you feel better the paint is already bubbled off the cover apparently 500゚ pain wasn't enough
I used 1200 on mine and it still bubbled, but I think it was because I put too many coats without it adequately drying so it bubbled, after that initial run and slight bubble though it hasn’t done it again.
 
Powder coat time?
I used 1200 on mine and it still bubbled, but I think it was because I put too many coats without it adequately drying so it bubbled, after that initial run and slight bubble though it hasn’t done it again.

Probably gonna try some 2000 degree header paint. The stuff that you have to cure in stages with heat. If not then powdercoat.
 

Latest posts

Back
Top