Walbro wt 669

[jerrycmorrow]

recleaned my wt669. You know how you shouldn't blow the high and low speed adjustor orings out with compressed air? Well I did. One has joined several carb springs and small bolts in the black hole
Anyone know where I can get one? Checked ereplacement and other places. They appear to be unobtainium. Or, anyone got one they can spare. Either way I need some help. Not wanting to by a new carb. Thanks much

 

[astnmacgto]

Not familiar with carb numbers, what saw is it off of

 

[HarleyT]

You are just assuming that your carb had them?

 

[jerrycmorrow]

Not familiar with carb numbers, what saw is it off of

It's off a weed eater xt360 trimmer

 

[HarleyT]

do you mean xt260?

 

[HarleyT]

https://walbro.force.com/parts/comm_partsservicedetails?partId=a0Fo000000V5CWAEA3

i don't think your carb has them

 

[astnmacgto]

Well I won't have anything like that, I never really mess with weed eaters

 

[backhoelover]

 

[backhoelover]

Does that model have a nozzle. If so you could have blew the check valve disc out

 

[backhoelover]

Needle oring are not listed on ipl

 

[backhoelover]

That model can have 3 different nozzle. Need to check it before I send orings

 

[HarleyT]

View attachment 523436

Wow! They landed in North Carolina??!!

 

[HarleyT]

So those are out of a wt669? Or just a couple of O-rings?

 

[HarleyT]

Well, I mean, just because there are O-rings in this diagram, doesn't mean that they are on the wt669.
If the reference number shows up in the part number list, then it is on the wt669.



but then that may not be the correct model number anyway.....

 

[jerrycmorrow]

You are just assuming that your carb had them?

Nope. Ones still in. Yes xt260. The walbro site for the wt669 shows orings

 

[HarleyT]

Nope. Ones still in. Yes xt260. The walbro site for the wt669 shows orings

OK, can you show what diagram you are looking at.
Just curious, is it different from the one I put up? The diagrams and link that I put up are from the Walbro site.

 

[jerrycmorrow]

OK, can you show what diagram you are looking at.
Just curious, is it different from the one I put up? The diagrams and link that I put up are from the Walbro site.

Im out of pocket but it looks the same. Nos. 4 & 5 look like the orings. Per ereplacement they're not available

 

[HarleyT]

Hard to say, those diagrams show lots of possible parts, many/most of which are not on your carb. Like it shows 2 primer bulbs.
That is why I asked if you are sure yours had O-rings to begin with

 

[HarleyT]

Can you put up a pic of your actual carb? I'll look around my junk drawer and see if I have anything similar.

 

[jerrycmorrow]